Abstract:The cracking behavior greatly influences the material removal and surface integrity during the abrasive machining of brittle materials. The abrasive machining can be simplified as a series of scratching by different-shaped indenters. In this paper, a scratch-induced stress field model is built to analyze the cracking behavior during scratching brittle materials. The model considers conical, pyramidal, and spherical (CPS) indenters and correlates the scratch-induced principal stress with workpiece material properties, indenter geometries, and scratch behavior parameters (e.g., scratch normal load, tangential load, friction coefficient, scratch depth). With the model, the effects of scratch depth and indenter geometries on the scratch behavior and cracking behavior are investigated. The results show that the scratch load decreases when a sharper indenter or a spherical indenter with a smaller radius is used. The larger the scratch depth, the easier it is for radial, median, and lateral (RML) cracks to initiate. There is an optimal indenter half-apex angle at which it is most difficult to initiate radial and median cracks. The lateral crack easily initiates when the indenter becomes sharp. The initiation position of radial crack changes from being in front of the indenter to being behind it as the scratch depth increases or the half-apex angle decreases. The propagation angle of radial crack decreases, while that of median crack increases with an increase in scratch depth. The sizes of RML cracks increase with an increasing scratch depth or half-apex angle. Finally, the model is validated through scratching experiments on fused silica using CPS indenters and by referencing previous research. It demonstrates that the model can accurately determine the sizes of RML cracks, with an average relative error of less than 11%. This research provides guidance on selecting suitable process parameters or indenter geometries to increase the material removal rate and mitigate the crack damage during the abrasive machining of brittle materials.

Removal characteristics and fluctuation behavior of cutting force during scratch process of RB-SiC ceramics

Fundamental Understanding of the Deformation Mechanism and Corresponding Behavior of RB-SiC Ceramics Subjected to Nano-Scratch in Ambient Temperature

Friction Behavior in Nanoscratching of Reaction Bonded Silicon Carbide Ceramic with Berkovich and Sphere Indenters

Experimental Investigation on the Surface and Subsurface Damages Characteristics and Formation Mechanisms in Ultra-Precision Grinding of SiC

Role of Si in the Surface Damage Mechanism of RB-SiC/Si under Mechanical Loading

Deformation and removal characteristics in nanoscratching of 6H-SiC with Berkovich indenter

Coupled SPH-FEM modeling of Berkovich indenter scratching of single-crystal silicon

Damage characteristics and material removal mechanisms of CVD-SiC in nanotests: A comparative with sintered SiC

Material removal and damage formation mechanisms induced by periodic indentation during ultrasonic vibration-assisted scratching of SiC f /SiC composites

Molecular Dynamics Simulation of Single-Crystal 4H-SiC Nano Scratching with Different Scratching Directions of the Tool

Transformation of Fracture Mechanism and Damage Behavior of Ceramic-Matrix Composites During Nano-Scratching

Effect of grinding damage on cutting force and ductile machining during single grain scratching of monocrystalline silicon

Study on the Machined Depth when Nanoscratching on 6H-Sic Using Berkovich Indenter: Modelling and Experimental Study

Study on wear of diamond during scratching SiC using molecular dynamics simulations

Cracking behavior during scratching brittle materials with different-shaped indenters

Influence of mechanical properties on material deformation behavior of different ceramics in scratching

Cutting Performance of Single Crystal Silicon Anisotropic Surface in Micro-nano Scale

Molecular dynamics simulation of the material removal in the scratching of 4H-SiC and 6H-SiC substrates

A material point method based investigation on crack classification and transformation induced by grit geometry during scratching silicon carbide

Study of Nanoscale Wear of SiC/Al Nanocomposites Using Molecular Dynamics Simulations

Experimental Study on the Surface Cutting Mechanical Properties of Single Crystal Silicon in Micro-Nano Scale