Abstract:Three types of initial microcracks have been clearly observed in concrete: those that developed around aggregate/coarse sand, those that developed perpendicular to the aggregate, and those that developed in the cement paste. However, the evolution of each of these microcrack types has not yet been separately studied. The variations among these microcrack types and their effect on the microstructures of the interfacial transition zone (ITZ) and cement paste have not been further investigated. Accordingly, this study presents an experimental and statistical study of the systematic and quantitative analysis of the initial microcrack characteristics of the concrete ITZ and cement paste, focusing on the aforementioned core scientific deficiencies. First, the initial microcracks within concrete are quantitatively and statistically evaluated. This is achieved by developing an image recognition algorithm and interactive algorithm for boundary recognition based on the experimental results of the fluorescent epoxy impregnation method (FEIM). Then, the different behaviors of each microcrack type are identified based on the statistical analysis of the number, area, length, width, and axis orientation of the microcracks. Accordingly, the effect of each type of microcrack on the microstructure and macroproperties of concrete can also be deduced. Finally, the initial microcrack characteristics within the ITZ is examined. The proportion of the total length of microcracks to the corresponding aggregate/coarse sand perimeter (α) and the parameter RL, which can reflect the location distributions of microcracks, is used to evaluate the characteristics of the initial microcracks within the ITZ statistically and quantitatively. The statistical approach employed in this study establishes the experimental and theoretical foundation for evaluating the initial characteristics of microcracks in concrete.

Microfracture Characterization of Cement Paste at Early Age by Indentation Test

Micro Indentation Fracture of Cement Paste Assessed by Energy-Based Method: the Method Improvement and Affecting Factors

Fracture Toughness And Microstructure Of Concrete At Early-Ages

Experiment Studies on Fracture Energy of Cement Paste and Mortar

Critical Features of Microstructure Development of Early-Age Cement Paste Revealed by Non-Contact Electrical Resistivity Measurement

New Insights into Creep and Creep Recovery of Hardened Cement Paste at Micro Scale

Experimental Study on Fracture Properties of Cementitious Materials

Experimental determination of fracture parameters for crack propagation in hardening cement paste and mortar

Fracture parametric study on cement-based materials from three-point bending test

Fracture properties of cement paste and mortar: An experimental investigation

Microscale Testing and Modelling of Cement Paste as Basis for Multi-Scale Modelling

Experimental study of flexural fatigue behaviour of cement paste at the microscale

Influence of Recycled Cement Paste Powder on Early-Age Plastic Shrinkage and Cracking of Cement-Based Materials

Development of Micro and Macro Fracture Properties of Cementitious Materials Exposed to Freeze-Thaw Environment at Early Ages

Nanoindentation-based study of the microstructure and degree of hydration in hardened cement paste

Modeling the mechanical properties of cement paste:Effect of different phases

A Mathematical Model for the Electrical Resistivity of Cement Paste at Early Ages Considering the Partially Saturated State

Determination of fracture energy of cement paste and mortar using three-point bending test

Initial Microcrack Characteristics of Concrete Interfacial Transition Zone and Cement Paste

Influence of Mineral Admixture on Early-Age Concrete Cracking

Simple Three-Step Analytical Scheme for Prediction of Elastic Moduli of Hardened Cement Paste