Abstract:Objectives: This study aimed to determine the crystalline phase composition of 3-6 mol% yttria-stabilized zirconia (3-6YSZ), specifically investigating the presence of tetragonal (t), cubic (c), and/or additional yttria-rich tetragonal (t') phase. Methods: Laboratory-fabricated specimens comprising 3-5YSZ, resembling translucent dental zirconia ceramics (TZ specimens), and a blend of 3YSZ and 8YSZ, representing a c-phase reference, were prepared. Additionally, 25 dental zirconia products stabilized with 3-6 mol% yttria were analyzed. Whole X-ray diffraction (XRD) patterns were obtained for Rietveld analysis, complemented by fine scanning in the 2θ region from 72º to 76º for qualitative phase analysis. Moreover, yttria concentrations in each specimen were determined using X-ray fluorescence (XRF) spectroscopy. Results: In the 2θ region from 72º to 76º, TZ and dental zirconia product specimens displayed four peaks attributed to t- and t'-phases, but the c-phase peak was absent. Rietveld analysis of the whole XRD patterns, utilizing a t-t' model, demonstrated the t-phase fraction ranging from 86 mass% in 3YSZ to 11 mass% in 6YSZ. Rietveld analysis appeared reliable, as the yttria contents calculated based on lattice parameters aligned well with those measured by XRF. This study established that dental 3-6YSZ consisted of yttria-lean t- and yttria-rich t'-phases. Significance: The present study enhances understanding of the crystalline structure of dental zirconia ceramics. Future crystallographic analyses of these ceramics should consider the presence of t- and t'-phases.

Transition Metals Increase Hydrothermal Stability of Yttria-Tetragonal Zirconia Polycrystals (3Y-TZP)

Raman and X-ray photoelectron spectroscopic characterizations of thermal stability of 3 mol% yttria stabilized zirconia ceramics

Mechanisms induced by transition metal contaminants and their effect on the hydrothermal stability of zirconia-containing bioceramics: an XPS study.

Microscopic Mapping of Dopant Content and Its Link to the Structural and Thermal Stability of Yttria-Stabilized Zirconia Polycrystals

Tetragonal‐to‐Monoclinic Phase Transitions in Nanocrystalline Rare‐Earth‐Stabilized Zirconia Prepared by a Mild Hydrothermal Method

Relationship Between Surface Residual Stress Fields and Hydrothermal Environment on Low Temperature Aging of 3Y-Tzp

The Effect of Al2O3 on the Thermal Stability and Mechanical Properties of 3Y-TZP

Effect of thermal treatment at high temperature on phase stability and transformation of Yb2O3 and Y2O3 co-doped ZrO2 ceramics

Effect of TiO2 and Ta2O5 Co-Doping on Phase Stability, Fracture Toughness, and Sintering Behavior of ZrO2 Stabilized by 10Mol%(y0.4gd0.3yb0.3)2o3

Low Temperature Degradation of Yttria Stabilized Zirconia

Phase stability and thermal conductivity of ytterbia and yttria co-doped zirconia

Hydrothermal Aging Property and Mechanism of Zirconia Ceramics with Different Stabilizers

Influence of Y2O3 Doping on Phase Evolution and Dielectric Characteristics of ZrO2 Ceramics

Effect of Doping Location Induced Anisotropy on Thermophysical Properties of Dilute Fe2O3‐Y2O3‐ZrO2 Solid Solutions

Isothermal Tetragonal-To-Monoclinic Phase Transformation In Y2o3-Partially Stabilized Zirconia: The Influence Of Grain Size

Study of Factors Influencing the Microstructure and Phase Content of Ultrafine Y-Tzp

Annealing-Induced Off-Stoichiometric and Structural Alterations in Ca2+- and Y3+-Stabilized Zirconia Ceramics

High Temperature Mechanical Properties of Zirconia Metastable T '-Phase Degraded Yttria Stabilized Zirconia

Critical evaluations on the crystallographic properties of translucent dental zirconia ceramics stabilized with 3-6 mol% yttria

Influence of yttria addition on the phase transformations of zirconia from zircon ore by carbothermal reduction process

Mechanical Properties Durability of Sc2O3-Y2O3 Co-Stabilized ZrO2 Thermal Barrier Materials for High Temperature Application