Abstract:The particle capture process of fibrous filter depends on not only filtration velocity, packing density of fibers, particle and fiber diameters, but also fiber arrangement (e.g. parallel model, staggered model, and separation ratio). In this work, the Lattice Boltzmann–Cellular Automata (LB–CA) probabilistic model for particle-laden flows was introduced to simulate the filtration process of multi-layer fiber filters with different fiber arrangement, and then the effects of the fiber arrangement on the capture efficiency, pressure drop, quality factor, and capture contribution were investigated. It was found that the staggered model performs better than the parallel model and its capture efficiency is higher than that of the parallel model. In addition, the capture efficiency and pressure drop both increase with the fiber separation ratio, while the quality factor decreases. With respect to the capture contributions of various rows of fibers in the steady and unsteady filtration processes, the fore fibers (especially the first row in the parallel model and the first two rows in the staggered model) play a more important role than the rear ones, especially when inertial impaction is predominant. Furthermore, the dynamic evolution of particle deposition patterns, pressure drop, capture efficiency, quality factor, and capture contribution due to different capture mechanisms in the particle loading of multi-fiber filters were investigated. The key factors to determine the dendritic structures are the shielding effect in the parallel model and the “river diversion” effect in the staggered model. Both the capture efficiency and pressure drop increases with the particle loading, however the pressure drop increases faster, resulting in the decrease of the quality factor. For the loading process of larger particles in the parallel model the pressure drop from the LB–CA model agree well with the predictions of the empirical model, and the interceptive capture efficiency predicted by the empirical model is also in good agreement with the LB–CA results. However, no model considers the fiber arrangement and different capture mechanisms. The LB–CA simulation provides good understanding in the dynamic filtration processes of multi-layer fibrous fibers, which is useful for filter design and arrangement optimization.

Filtration of Micro-Particles Within Multi-Fiber Arrays by Adhesive DEM-CFD Simulation

Effect of Adhesion on Clogging of Microparticles in Fiber Filtration by DEM-CFD Simulation

Analysis of filtration process of 3-D mesh spacer filter by using CFD-DEM simulation

Dimensionless study of the fiber arrangement on particle filtration characteristics in a multi-fiber filter

Simulation of Filtration Process for Multi-Fiber Filter Using the Lattice-Boltzmann Two-Phase Flow Model

Modeling of dynamic deposition and filtration processes of airborne particles by a single fiber with a coupled lattice Boltzmann and discrete element method

Numerical simulation of mixed aerosols deposition behavior on cylindrical cross fibers

Adjustable fiber structure design for precise aerosol filtration

Lattice Boltzmann Simulation of Non-Steady-State Particulate Matter Filtration Process in Woven Fiber

Numerical Investigation on Non-Steady-state Filtration of Elliptical Fibers for Submicron Particles in the ‘‘greenfield Gap’’ Range

CFD-DEM Study of Bridging Mechanism of Particles in Ceramic Membrane Pores under Surface Filtration Conditions

Investigation of the filtration performance for fibrous media: Coupling of a semi-analytical model with CFD on Voronoi-based microstructure

High fidelity simulation of ultrafine PM filtration by multiscale fibrous media characterized by a combination of X-ray CT and FIB-SEM

Effect of filter microstructure on filtration characteristics in a nonwoven bag filter: A resolved CFD-DEM approach coordinated with X-ray computed tomography image

Study of the Water Cleaning Process by Using CFD-DEM Method: A Case Study of Coarse Filter Material

Numerical simulation of non-spherical microparticles' deposition on single fiber

Adhesion force analysis for prevention of particle resuspension in multiplexed inertial coalescence filters

Numerical Research on the Filter Performance of Pm2.5 on the Micro-Scale of Fibrous Assembly

Numerical calculation and analysis of filtration performance of an effective novel structural fiber for PM2.5

Optimization on the performance of fibrous filter through computational fluid dynamic simulation coupled with response surface methodology

Influence of fiber on filtration performance for PM2.5