Abstract:The main objective of this study was to determine the effect of filter pore size and fiber diameter on the performance of the baghouse filters for ultra-low emission. In this study, three kinds of conventional polyester filter (depth filtration media) and two kinds of polytetrafluoroethylene membrane-coated polyester filter (surface filtration media), having various filter pore sizes and fiber diameters, were tested to determine the performance of static and dynamic filtration. In order to determine the static filtration performance, the filtration resistance and the filtration efficiency of the clean filter media were measured by the arrestance method. The dynamic filtration performance experiments were conducted to determine the dynamic resistances, dust depositions, and dynamic filtration efficiencies of the dust-containing filter media under the condition of dust airflow filtration through a pulse-cleaning cycle. In the dynamic filtration performance experiments, the size of 50% test dust was less than 2.5 μm, and the mass mean aerodynamic diameter of the dust was 1.5 μm. The filtration velocity was 2 m∙min−1, and the dust concentration was 18.4 g∙m−3. The static filtration performance experiments showed that the filter pore size greatly affected the filtration resistance and the filtration efficiency of the fabric structure of the surface filtration media. In the depth filtration media, the filtration efficiency and the filtration resistance of the fabric structure were improved when the filter pore size and the fiber diameter were smaller in magnitude. For all the five filter media, smaller the pore size of the filter media, greater was the filtration precision (for fine particles, such as PM2.5) of the fabric structure. In the dynamic filtration performance experiments, the filter pore size and the fiber diameter of the depth filtration media affected the dynamic filtration resistance and the dynamic filtration efficiency of the depth filtration media by affecting the deposition rate of dust in the depth filtration media; however, the filter pore size of the surface filtration media affected the blocking rate of dust in the membrane micropores, thus influencing the dynamic filtration resistance and the dynamic filtration efficiency of the surface filtration media.

Effect of filter microstructure on filtration characteristics in a nonwoven bag filter: A resolved CFD-DEM approach coordinated with X-ray computed tomography image

High fidelity simulation of ultrafine PM filtration by multiscale fibrous media characterized by a combination of X-ray CT and FIB-SEM

Study of structural factors of structure-resolved filter media on the particle loading performance with microscale simulation

Filtration of Micro-Particles Within Multi-Fiber Arrays by Adhesive DEM-CFD Simulation

Investigation of Air Filter Properties of Flash-Spinning Nanofiber Non-Woven Fabric

Experimental and CFD analysis of fluid flow through nanofiber filter media

Adjustable fiber structure design for precise aerosol filtration

Effect of Adhesion on Clogging of Microparticles in Fiber Filtration by DEM-CFD Simulation

Multi-Scale Microstructure Investigation for a PM2.5 Air-Filter Efficiency Study of Non-Woven Polypropylene

CFD-DEM Study of Bridging Mechanism of Particles in Ceramic Membrane Pores under Surface Filtration Conditions

Flow field analysis of cigarette filter through micro-CT-based geometries and CFD simulation

Investigation of the filtration performance for fibrous media: Coupling of a semi-analytical model with CFD on Voronoi-based microstructure

Study on the Filtration Performance of the Baghouse Filters for Ultra-Low Emission as a Function of Filter Pore Size and Fiber Diameter

Analysis of filtration process of 3-D mesh spacer filter by using CFD-DEM simulation

Investigation of air filter properties of nanofiber non-woven fabric manufactured by a modified melt-blowing method along with flash spinning method

Enhanced Aerosol Particle Filtration Efficiency of Nonwoven Porous Cellulose Triacetate Nanofiber Mats

Filtration performance and loading capacity of nano-structured composite filter media for applications with high soot concentrations

Dynamic behavior and mechanistic analysis in filtration of dilute particulate suspensions through nanofibrous membrane

Overview of Fine Coal Filtration. Part I: Evaluation of Filtration Performance and Filter Cake Structure

Adhesion force analysis for prevention of particle resuspension in multiplexed inertial coalescence filters

Optimization on the performance of fibrous filter through computational fluid dynamic simulation coupled with response surface methodology