Abstract:The matching analysis of compression ratio and ignition timing and the calculation of knock intensity are carried out for the opposed‐piston two‐stroke (OP2S) gasoline engine by establishing a thermodynamic process simulation model and a knock combustion prediction model. The flame propagation and the knock response rate of the combustion process are analyzed by constructing an in‐cylinder combustion model for both flat piston and pit piston combustion chamber structures of the OP2S gasoline engine to provide a theoretical foundation for optimizing the design of the OP2S gasoline engine. The spark plug of an opposed‐piston two‐stroke (OP2S) gasoline engine is arranged on the side wall of the cylinder liner, far from the center of the combustion chamber; the ignition core of the mixture is offset, the flame propagation distance is increased, the combustion duration is prolonged, and the knock tendency is severe. In this paper, a quasi‐dimensional two‐zone combustion model is used in GT‐Power software to establish a thermodynamic process simulation model and a knock prediction model is included to analyze the effect and matching of the compression ratio, ignition timing, and other thermodynamic process parameters on the knock intensity and engine performance. The extended coherent flame model combustion model is coupled with the Huh–Gosman spray model in AVL‐Fire software, and the An B knock model is used to establish an in‐cylinder combustion model and analyze the flame propagation and the knock response rate of the flat and pit piston during the combustion process. With an increase of the compression ratio, the temperature and pressure of the mixture in the combustion chamber increase at the time of ignition, which leads to the knocking combustion in the cylinder. With an increase of the ignition advance angle, the in‐cylinder pressure and temperature increase rapidly, which increases the likelihood of knocking combustion. In comparison with the pit piston combustion chamber, the flame propagation speed of the flat piston combustion chamber is relatively slow, which increases the knock tendency. The results show that lowering the compression ratio and delaying the ignition can reduce the in‐cylinder knock tendency by setting a compression ratio of 10.5 and an ignition advance angle of 20°CA. When the pit piston is used to organize the squish and inverse squish before and after the inner dead center, the flame propagation process can be promoted. The knock response rate of pit piston is 24.7% lower than that of flat top piston.

A Two-Zone Combustion Model for Knocking Prediction of Marine Natural Gas SI Engines

Predicting the Combustion Phasing of a Natural Gas Spark Ignition Engine Using the K-Nearest Neighbors Algorithm

Numerical Simulation Of Re-Entrant Bowl Effects On Natural-Gas Spark-Ignition Operation

Implementation and Parameter Analysis of the Knock Phenomenon of a Marine Dual-Fuel Engine Based on a Two-Zone Combustion Model

Knock Prediction for Dual Fuel Engines by Using a Simplified Combustion Model.

Numerical investigation on knock characteristics and mechanism of large-bore natural gas dual-fuel marine engine

Investigation of Multistage Combustion Inside a Heavy-Duty Natural-Gas Spark-Ignition Engine Using Three-Dimensional Computational Fluid Dynamics Simulations and the Wiebe-Function Combustion Model

Progress in knock combustion modeling of spark ignition engines

Numerical modeling of knocking combustion in spark ignition engines

Effects of Chamber Geometry, Hydrogen Ratio and EGR Ratio on the Combustion Process and Knocking Characters of a HCNG Engine at the Stoichiometric Condition

Numerical Modeling of the Propagating Flame and Knock Occurrence in Spark-Ignition Engines

Numerical Simulation of Knocking Combustion Process in a Spark Ignition Engine

Numerical investigation on combustion regulation for a stoichiometric heavy-duty natural gas engine with hydrogen addition considering knock limitation

Three-Dimensional Computational Fluid Dynamics Modeling of the Combustion Process of a MAN L21/31 Marine Diesel Engine

Knock combustion characteristics of an opposed‐piston two‐stroke gasoline engine

Pressure Oscillation and Chemical Kinetics Coupling During Knock Processes in Gasoline Engine Combustion

Effects of injection strategy on the knocking behavior of a pilot ignited direct injection natural gas engine

Knocking suppression by stratified stoichiometric mixture with two-zone homogeneity in a DISI engine

Statistical Quantification of Knock With Spark Ignition and Pre-Chamber Jet Ignition in a Light Duty Gasoline Engine

A Generalized Kinetic Model with Variable Octane Number for Engine Knock Prediction

An experimental study of knock analysis of HCNG fueled SI engine by different methods and prediction of knock intensity by particle swarm optimization-support vector machine