Abstract:We develop the direct laser melting of ceramic paste technology for application in ceramic additive manufacturing (AM). The Al2O3 ceramic paste, which is a homogeneous mixture of DI-water and Al2O3 ceramic powders, was deposited on an Al2O3 substrate using free-forming extrusion (FFE), and subsequently melted by a CO2 laser. To better control the laser melting process, the flow behavior of the laser-melted Al2O3 was investigated by evaluating the microstructure of the laser-melted Al2O3 single tracks. When the laser scanning speed increased from 1 to 3.5 mm/s at a fixed laser power, the permeation of the molten Al2O3 into the surrounding porous paste was reduced, resulting in the improvement of the surface uniformity of the laser-melted Al2O3 tracks. Through optimizing the laser scanning strategy, a fully-dense Al2O3 layer with smooth surface was achieved. The phase composition and density of the laser-melted Al2O3 layers were evaluated to study their properties. The thickness of the dense Al2O3 layer varied from ∼90 μm to ∼120 μm periodically due to the line-by-line scanning of the Gaussian laser beam. In addition, the relationship between the melting thickness and the laser scanning speed was also investigated to further improve the controllability of the laser melting process. This direct laser melting of ceramic paste technology is promising for applications in ceramic AM, such as 3D printing of ceramic components and high-temperature ceramic welding.

Status and Prospect of Laser Additive Manufacturing of Ceramic Materials

The research status and development trend of additive manufacturing technology

Research Status and Development Trend of Laser Additive Manufacturing Technology

A critical review of direct laser additive manufacturing ceramics

Advances and Challenges in Direct Additive Manufacturing of Dense Ceramic Oxides

Research Progress and Current Situation of Laser Additive Technology

Research and prospect on microstructure and properties of laser additive manufactured parts

Direct laser melting of Al2O3 ceramic paste for application in ceramic additive manufacturing

Laser Additive Manufacturing of Ceramic Reinforced Titanium Matrix Composites: A Review of Microstructure, Properties, Auxiliary Processes, and Simulations

Progress and challenges towards additive manufacturing of SiC ceramic

An Overview of Laser Engineered Net Shaping of Ceramics

Development of ceramic additive manufacturing: process and materials technology

The mechanism and machinability of laser-assisted machining zirconia ceramics

A review on ceramic coatings prepared by laser cladding technology

Additive Manufacturing of Advanced Ceramics Using Preceramic Polymers

Laser-Based Manufacturing of Ceramics: A Review

Recent Research and Prospect of 3D Printing Technology in the Preparation of New Ceramic Materials

Ceramic Robocasting: Recent Achievements, Potential, and Future Developments

Research of development status of laser-assisted machining in situ

Modeling and preparation of additive-manufactured laser ceramics

Recent Advances in Multi-Material 3D Printing of Functional Ceramic Devices