Abstract:Laser fusion additive manufacturing of metals has been growing tremendously over the past decade. Despite its unrivaled capability to directly fabricate complex geometries, the accuracy. repeatability, and reliability of the build remain a major concern. From the micro perspective, it is the unfavorable microstructures and defects/anomalies that deteriorate the service performances such as fatigue life and corrosion resistance. The microstructures here involve not only melt pool and keyhole but also grain morphology and size. crystal orientation, interface structure, composition homogeneity, phase stability, etc. The defects/anomalies mainly include porosity. balling. lack of fusion, spattering, element loss, oxidation, micro residual stress and deformation, microcracking, and rough surface. Accurate detection and characterization of these features are critical for their understanding and control. Traditionally, we use optical microscope, electron microscope, X-ray tomography and diffraction and so forth. to perform postmortem analysis and track the thermal traces the local material has experienced. However, such information and evidence are typically static and limited. This poses difficulties in recreating and interpreting the microstructural formation. In this review, we summarize recent progress on in situ/operando monitoring the laser fusion additive manufacturing of metals. It mainly covers high-speed visible light and thermal imaging, laboratory X-ray imaging, ultrasonic measurement, and high-speed synchrotron X-ray imaging and diffraction. Beyond traditional postmortem characterizations, the in situ/ operando techniques have demonstrated the capability to capture the transient and dynamic formation and evolution processes of various microstructures and defects. They are revolutionizing the research mode in the field of metal additive manufacturing, from trial and error to mechanism oriented. In the former, we continue to optimize the objective function (e. g., grain morphology and size) until it arrives at a satisfactory solution, largely based on limited experience and knowledge and costly iterations. In the latter, we quest for the ultimate solution to manufacturing defect-free and perfect structures through direct exploration of the physical origins of the aforementioned features. Among the various techniques. we address high-speed synchrotron X-ray imaging and diffraction. It is an emerging approach in this field and is more suitable to monitor the internal microstructural evolution of metals, e.g.. melt pool and keyhole dynamics. pore formation, cracking, rapid solidification, and phase transformation, because of the micrometer spatial resolution, sub-nanosecond temporal resolution, megahertz frame rate, and millimeter penetration capacity. Nevertheless, other techniques like high-speed visible light and thermal imaging have irreplaceable advantages and application scenarios. They can provide complementary information (e.g., thermal distribution on the melt pool surface, vapor plume dynamics, and three-dimensional spatter morphologies) for comprehensive understanding of the fundamental mechanisms in laser melting. Looking ahead to the next decade, the integration of multiple in situ/operando techniques and the translation among the resultant multi-dimensional signals, as well as big data computing and high precision modeling, will bridge understanding of mechanisms on the microscale and tailoring of properties on the macroscale. This will promote sustainable growth of the additive manufacturing industry.

Research of development status of laser-assisted machining in situ

Development of Laser Surface Modification Technology

The Technology and Development of Laser Assisted Machining

Experimental Study on Laser Assisted Milling of Sintered Silicon Nitride Ceramics

Micro/Nano Periodic Surface Structures and Performance of Stainless Steel Machined Using Femtosecond Lasers

Development of an In-Situ Laser Machining System Using a Three-Dimensional Galvanometer Scanner

Field-assisted machining of difficult-to-machine materials

Research Advancement on Laser Etching Technology of Silicon Carbide Ceramic Matrix Composite

Laser-Assisted Machining of Advanced Materials

Research on unconventional laser machining

Development of a Laser Scanning Machining System Supporting On-the-Fly Machining and Laser Power Follow-Up Adjustment

Status and Prospect of Laser Additive Manufacturing of Ceramic Materials

RECENT DEVELOPMENT IN LASER MATERIALS PROCESSING

The Fabrication of Micro/Nano Structures by Laser Machining

Experimental Research on Laser Assisted Machining of Silicon Nitride Ceramics

Experimental study on laser assisted ultrasonic elliptical vibration turning (LA-UEVT) of 70% SiCp/Al composites

System Design For Laser Assisted Milling Of Complex Parts

Operando Monitoring Microstructures and Defects in Laser Fusion Additive Manufacturing of Metals

Recent Progress on In-Situ Characterization of Laser Additive Manufacturing Process by Synchrotron Radiation

Experimental and FEM study of surface formation and deformation mechanism of SiCp/Al composites in laser-ultrasonic vibration assisted turning

Laser machining fundamentals: micro, nano, atomic and close-to-atomic scales