Abstract:Compared with traditional technologies,3D printing technology has shown great advantages in direct formation of metal and polymer parts with complex shapes.However,there are many problems in the preparation of ceramic parts via 3D printing.In this respect,lots of researches have been done by Prof.Shi Y S`s group in Huazhong University of Science and Technology on the preparation of different ceramic materials used for 3D printing technology and related forming methods.In this review,two main methods to prepare composite powders used in Selective Laser Sintering (SLS) were introduced in detail: ①mechanical mixing method,by which ceramic powders and polymer were directly mixed;②dissolution-precipitation process or solvent evaporation method,by which the ceramic powders were coated with polymer.The results showed that both two preparation methods mentioned above were suitable to prepare ceramic-polymer composite powders with good fluidity for 3D printing technology.Furthermore,the forming mechanisms of SLS and the effects of SLS process parameters,including preheating temperature,laser power,layer thickness and so on,on mechanical properties and manufacturing accuracy of ceramic green parts were systematically discussed.On the basis of above results,porous cordierite and kaolin ceramics with 3D pore structures,which were difficult to be fabricated by the conventional forming technologies,were manufactured by SLS technology with optimized process parameters.In addition,to improve the density and mechanical properties of SLSed ceramic parts,a hybrid technology named SLS/Cold Isostatic Pressing (CIP) was proposed by introducing the CIP technology into the field of SLS.Dense Al2O3,ZrO2 and SiC ceramic parts with high performance and complex structure were prepared through this hybrid technology.The results indicated that SLS and SLS/CIP technologies could be the promising routes to prepare high-performance ceramic components used in the fields of aerospace,national defense,etc.

Recent Research and Prospect of 3D Printing Technology in the Preparation of New Ceramic Materials

Research Progress in Ceramic 3D Printing Technology and Material Development

Research and application progress of 3D printing ceramic casting mould

3D printing of ceramics: A review

Research Progress of Bio-Ceramic 3D Printing Technology

3D printing of ceramics: Advantages, challenges, applications, and perspectives

[Status of 3D Printing Technology for Preparing Bioceramic Materials]

Recent Advances in Multi-Material 3D Printing of Functional Ceramic Devices

Photopolymerization-Based Three-Dimensional Ceramic Printing Technology

Application of Digital 3D Printing Technology in Ceramic Art Creation

Research on The Application of Ceramic 3D Printing Technology

Study on 3D plastic forming and material properties of ceramic

Review and Expectation of 3D Printing Applied to Ceramic Model Design

Ceramics 3D Printing: A Comprehensive Overview and Applications, with Brief Insights into Industry and Market

Research Progress in Preparation of Porous Ceramics

Review of 3 D Printing Technology of Ceramic

Research Progress on Powder-based Laser Additive Manufacturing Technology of Ceramics

Recent advances in 3D printing of porous ceramics: A review

Preparation of Ceramic Materials Used for Selective Laser Sintering and Related Forming Methods

Lithography-based additive manufacturing of ceramics: Materials, applications and perspectives

A review of 3D printed porous ceramics