Abstract:Purpose This paper aims to develop efficient and simple models for thermal distribution, melt pool dimensions and controlled phase change in the laser additive manufacturing (AM) of bulk and powder particles ceramic materials. Design/methodology/approach This paper proposes new analytical models for the AM of bulk and powder bed ceramic materials. A volumetric moving heat source, along with the complete melting of bulk and powder particle materials, is taken into account. Different values of laser absorption coefficient in solid and liquid states have been used to investigate the phase transformation. Furthermore, the pores and voids dimensions are also included in the modeling. Theoretical predictions have been compared with the experimental analyses and finite element simulations in laser to silicon nitride and laser to alumina interaction. The analysis focuses on the impact of laser power and scanning speed on the melt pool width and depth evolution into the bulk substrate and powder bed. Findings This study shows that the powder particles exhibit a higher thermal distribution value than the bulk substrate because of voids in the powder layer. The laser beam experiences multiple reflections in the presence of porosity/voids, thus increasing the surface absorption coefficient, which becomes relevant with the increment in the pore/void dimension. A direct relationship has been found between the laser power and melt pool dimensions, while the scanning speed displayed an inverse relationship for the melt pool width and length. Larger melt dimensions were inferred in the case of laser–powder particle interaction compared with laser–bulk substrate interaction. A close correlation was found between the analytical simulations, experimental investigations and numerical simulation results within the range of 4%–8%. Originality/value This paper fulfills an identified need to develop efficient and simplified models for ceramics laser AM by taking into account different laser absorption coefficients in solid and liquid form, voids and pores dimensions and controlled phase transformation to avoid vapors and plasma formation. The limitation of the finite element simulation model is that the solution is strongly dependent on the mesh quality and accuracy directly linked to the computation efficiency and time. A finer mesh requires a longer computing time than a coarse mesh. Finite element simulations require, however, specialized skills.

Modeling and preparation of additive-manufactured laser ceramics

Laser additive manufacturing of bulk and powder ceramic materials: mathematical modeling with experimental correlations

A critical review of direct laser additive manufacturing ceramics

Advances and Challenges in Direct Additive Manufacturing of Dense Ceramic Oxides

Numerical Simulation of Sintering of DLP Printed Alumina Ceramics

Understanding the consolidation mechanism of selective laser sintering/powder bed selective laser process of ceramics: Hydroxyapatite case

Binder Jetting Additive Manufacturing of Ceramics: Analytical and Numerical Models for Powder Spreading Process

Microstructures and mechanical properties of additively manufactured alumina ceramics with digital light processing

Study on Laser Selective Curing Additive Manufacturing of Foamed Structural Ceramics

Formation mechanism and controlling strategy of lamellar structure in 3D printed alumina ceramics by digital light processing

Predicting rapid growth behavior in solidified eutectic ceramic composites using infrared thermal imaging and thermal field simulation during laser directed energy deposition

Direct laser melting of Al2O3 ceramic paste for application in ceramic additive manufacturing

An Overview of Laser Engineered Net Shaping of Ceramics

Directly fabricated Al2O3/GdAlO3 eutectic ceramic with large smooth surface by selective laser melting: Rapid solidification behavior and thermal field simulation

Conventional versus additive manufacturing in the structural performance of dense alumina-zirconia ceramics: 20 years of research, challenges and future perspectives

Additive manufacturing of Al2O3 ceramic core with applicable microstructure and mechanical properties via digital light processing of high solid loading slurry

Multiscale Finite Element Modeling of Alumina Ceramics Undergoing Laser-Assisted Machining

Status and Prospect of Laser Additive Manufacturing of Ceramic Materials

4D Additive–Subtractive Manufacturing of Shape Memory Ceramics

Stereolithography-based additive manufacturing of lightweight and high-strength Cf/SiC ceramics

Asynchronous Densification of Zirconia Ceramics Formed by Stereolithographic Additive Manufacturing