Abstract:Compacted graphite iron (CGI), a prototypical heterogeneous material, potentially demonstrates distinctive cutting deformation behaviours attributed to the random distribution of graphite and performance differences between graphite and the matrix, which have not yet received adequate attention. This study focuses on the influence of the microstructure characteristics of CGI on the formation of serrated chips. The morphology of the serrated chip segments during the orthogonal turning of CGI was observed in detail, the microstructures of the chip roots were characterised and analysed using various techniques, and a finite-element cutting simulation model considering the microstructural characteristics of CGI was developed. Results suggest that the formation of serrated chips in CGI is influenced by periodic and aperiodic brittle fractures, referred to as quasi-periodic brittle fractures, which are controlled by the distribution of graphite in CGI. This results in variations in the morphology and dimensions of the serrated chips in CGI. Plastic deformation is concentrated in a triangular deformation zone (TDZ) near the tool-chip interface, which is broader than the conventional secondary deformation zone. The experimental and simulation results revealed the reasons for the formation of the TDZ and emphasized the critical role of graphite in the formation of serrated chips in CGI. The graphite particles near the tool-chip interface promoted plastic deformation along the interface owing to the principle of minimum energy and restricted deformation perpendicular to the interface due to its structure, leading to the formation of the TDZ. The influence of graphite on material flow and the formation of the TDZ during the formation of serrated chips in CGI is a novel discovery. The microstructure evolution of the pearlite matrix in CGI caused by cutting deformation was analysed. The results demonstrate that the distinctive deformation behaviour of CGI contributes to the fragmentation of the pearlite structure, grain refinement, and increased dislocation density in the TDZ. Finally, the influence of the serrated chip formation mechanism on chip morphology and cutting force in CGI was discussed. These findings offer significant scientific insights and contribute to the fundamental understanding of the chip formation process in CGI.

Mechanism of the crack propagation in the chip root in dry hard orthogonal turning of the hardened steel

Chip Formation Mechanism in Dry Hard High-Speed Orthogonal Turning of Hardened AISI D2 Tool Steel with Different Hardness Levels

Simulation of Chip Formation in High-Speed Hard Machining

The Finite Element Analysis Of Serrated Chip Formation In High-Speed Cuffing Auto Panel Dies

Finite Element Simulation of Serrated Chip Formation in High-speed Milling of A lloy Cast Iron

Mechanism of Saw-Tooth Chip Formation of Titanium Alloy Based on Finite Element Simulation

Numerical Investigation of the Evolution of Grit Fracture and Its Impact on Cutting Performance in Single Grit Grinding

Effect of cutting conditions on the serrated chip formation in high-speed cutting

Serrated chip characteristics and formation mechanism in high-speed machining of selective laser melted Ti6Al4V alloys

A study on mechanisms of saw-tooth chip formation in hard turning under hybrid nanofluid-assisted MQL environment

Understanding The Deformation Of Metals In High Speed Cutting

Theoretical Analysis of Serrated Chip Formation Based on Ideal Models in High Speed Cutting

Experimental Investigation of Surface Integrity in Finish Dry Hard Turning of Hardened Tool Steel at Different Hardness Levels

Research on the analytical modeling of critical conditions of serrated Chip formation based on thermal-mechanical coupled material behavior

Study on the Formation Mechanism of Serrated Chips in the Cutting Process of Powder Metallurgy Superalloys Based on a Modified J–C Constitutive Relation Simulation Model

A chip formation mechanism taking into account microstructure evolution during the cutting process: Taking compacted graphite iron machining as an example

Large Chip Production Mechanism under the Extreme Load Cutting Conditions

Characterization of serrated chip formation based on in-situ imaging analysis in orthogonal cutting

Research on serrated chip morphology for turning Ti6Al4V titanium alloy by considering damage evolution

Ratcheting short crack behavior in medium carbon bainitic back-up roll steel under mild tractive rolling contact

Research on microhardness prediction of 304 stainless steel turning based on dislocation density