Abstract:A cost-effective approach to manufacture Carbon/Carbon composites is to infiltrate carbon fiber preforms with a polymer precursor and pyrolyze it to form the carbon matrix. During pyrolysis, the microstructure changes due to decomposition reactions creating a high degree of porosity consisting of interconnected network of voids and cracks. To densify, the pyrolyzed composite is infiltrated with polymer precursor to fill the porous network. The cycle of pyrolysis followed by infiltration is repeated until the porosity is minimized and the desired density is achieved. The permeability, porosity and viscosity of the polymer govern the infusion pressure and time for the re-infiltration steps. In this work, the permeability of benzoxazine-based Carbon/Carbon composites was measured for different degradation levels with three distinctly different pyrolyzing schedules. The samples were characterized systematically at increasing pyrolyzing temperatures until full conversion of the precursor into carbon matrix was achieved. The porosity of the material was evaluated by X-ray micro-computed tomography and by pycnometry. The through the thickness permeability of the composite was measured via a pulse-decay experiment after each heating step in the pyrolysis cycle. In this experiment pressure decay with time is recorded as air is evacuated from the cavity through the connected pathways of the porous network within the sample. The experimental correlation between the permeability and interconnected porosity of the microstructure is established. It is shown that the pulse-decay test with air effectively characterizes the permeability of the pyrolyzed composite.

Effect of Oxygen and Hydrogen on Microstructure of Pyrolytic Carbon Deposited from Thermal Decomposition of Methane and Ethanol

Deposition mechanism and microstructure of pyrocarbon prepared by chemical vapor infiltration with kerosene as precursor

Preparation of C/C Composites by Thermal Gradient Chemical Vapor Infiltration with Vaporized Kerosene As a Precursor

Effects of Pore Structure on Methanol Selectivity in Carbon Monoxide Hydrogenation

The effect of carbon nanotubes on the microstructure and morphology of pyrolytic carbon matrices of C–C composites obtained by CVI

Micro- and nano-structural investigations of C/C composites

Influence of Precursors on Preparation of C/C Composites by CVI

Correlation of the permeability and porosity development of carbon/carbon composites during pyrolysis

The Investigation Of Pyrolytic Coating On Carbon Monofilament By Cold Wall Cvd Using Ethanol As Precursor

Effect of chemical vapor infiltration on the flexural properties of C/C-SiC composites prepared by the precursor infiltration pyrolysis method

GROWTH CHARACTERS AND MODEL OF PYROLYTIC CARBON IN CHEMICAL VAPOR INFILTRATION PROCESS

Deposition Kinetics and Mechanism of Pyrocarbon for Electromagnetic-Coupling Chemical Vapor Infiltration Process

Microstructure and Electrical Resistivity of Carbon/carbon Composites Prepared by Thermal Gradient Chemical Vapor Infiltration

A molecular-level analysis of gas-phase reactions in chemical vapor deposition of carbon from methane using a detailed kinetic model

The Effect of Oxygen on In-Situ Evolution of Chemical Structures During the Autothermal Process of Tobacco

Effect of Pyrocarbon Content in C/C Preforms on Microstructure and Mechanical Properties of the C/C–SiC Composites

Effect of molecular structure on pyrolysis coking performances of hydrocarbons at different temperatures

Novel Carbon Felt Composites with Pyrocarbon Deposited on Carbon Fiber: Hierarchical Microstructure for Improved Phenol-Adsorption

Molecular Insights into the Initial Formation of Pyrolytic Carbon Upon Carbon Fiber Surface

Preparation and characterization of carbon felt/carbon composites by chemical vapor infiltration process

Improvement of Chemical Liquid Vaporized Infiltration Process for Fast Densification of Carbon/Carbon Composites