Abstract:CO2 gasification-reforming is a promising approach for the transformation of carbonaceous materials into CO-rich syngas. Within municipal solid waste and agricultural waste streams, plastics are commonly found intermixed with biomass waste. This study delves into the CO2 gasification-reforming of biomass (cellulose) and various plastics (PET, HDPE, and PS) using a self-built online weighing fixed bed reactor and a two-stage fixed bed reactor. During the gasification-reforming of cellulose-plastic mixtures without the catalyst, the experimental gas production rate of cellulose slightly decreased, with the peak of gas production migrating to a higher temperature range. This phenomenon can be attributed to the molten plastic adhering to the cellulose surface, which impeded heat and mass transfer essential for cellulose decomposition. Furthermore, the gas production from plastics was suppressed in the mixtures, likely due to the interference of cellulose char in the decomposition of plastics. The incorporation of 2%Ni/CeO2 catalysts not only augmented gas yields and production rates but also emphasized the synergistic interactions. For the cellulose-HDPE mixture, the total gas yield was reduced by 14.9 mmol gsample −1 relative to the theoretical value. Given that HDPE possessed the highest decomposition temperature, the synergistic interaction was predominantly driven by the inhibitive nature of cellulose char. In contrast, the total gas yields for cellulose-PET and cellulose-PS mixtures increased by 8.7 mmol gsample −1 and 13.3 mmol gsample −1, respectively. The free radicals emanating from cellulose could trigger the decomposition of volatile components from plastics. Concurrently, the decomposition products of plastic could serve as hydrogen donors to stabilize the volatiles of cellulose. The interactions primarily affect the volatiles and tar components of the mixtures. The catalysts amplified gas yields by facilitating the CO2 reforming of tar, therefore, the synergistic interaction became evident upon catalyst addition. Gas chromatography-mass spectrometry analyses of the tar also corroborated the described interaction mechanisms between cellulose and plastics. Thermogravimetric analysis of used catalysts indicated that the synergistic action between cellulose and plastic could effectively diminish coke deposition, thereby preventing swift catalyst deactivation.

Carbon deposition behavior on biochar during chemical vapor deposition process

Waste Plastics Complement Biochar: Innovative Approach in Curbing Toxicants (KCN/NaCN) in N-Containing Biochar

Chemical recycling of mixed plastic waste via catalytic pyrolysis

Impact of biogenic impurities on catalytic synthesis of multi-walled carbon nanotubes and hydrogen from polyolefin resins

Effect of co-pyrolysis of sewage sludge with different plastics on the nitrogen, sulfur, and chlorine releasing characteristics and the heavy metals ecological risk of biochar

Value-Added Products from Catalytic Pyrolysis of Lignocellulosic Biomass and Waste Plastics over Biochar-Based Catalyst: A State-of-the-Art Review

Simultaneous production of aromatics-rich bio-oil and carbon nanomaterials from catalytic co-pyrolysis of biomass/plastic wastes and in-line catalytic upgrading of pyrolysis gas

Structure-oriented conversions of plastics to carbon nanomaterials

Enhanced Biochar Production via Co-Pyrolysis of Biomass Residual with Plastic Waste after Recycling Process

Pyrolysis of exhausted biochar sorbent: Fates of cadmium and generation of products

Conventional pyrolysis of Plastic waste for Product recovery and utilization of pyrolytic gases for carbon nanotubes production

Catalytic Pyrolysis of Waste Plastics over Industrial Organic Solid-Waste-Derived Activated Carbon: Impacts of Activation Agents

Catalytic Pyrolysis of Poplar Sawdust over Biochar of Varied Origin: Impact of Volatile-Char Interactions

Synergistic interactions between cellulose and plastics (PET, HDPE, and PS) during CO2 gasification-catalytic reforming on Ni/CeO2 nanorod catalyst

Effect of ZnCl2-activated Biochar on Catalytic Pyrolysis of Mixed Waste Plastics for Producing Aromatic-Enriched Oil.

Inhibitory and synergistic effects on thermal behaviour and char characteristics during the co-pyrolysis of biomass and single-use plastics

Exploring the characteristics of coke formation on biochar-based catalysts during the biomass pyrolysis

Enhanced degradation of polylactic acid microplastics in acidic soils: Does the application of biochar matter?

Enhancement of aromatics and syngas production by co-pyrolysis of biomass and plastic waste using biochar-based catalysts in microwave field

Impact of biochar catalyst on pyrolysis of biomass of the same origin

Conversion of Waste Plastic Packings to Carbon Nanomaterials: Investigation into Catalyst Material, Waste Type, and Product Applications