Abstract:The inefficiency of grain refinement processes has traditionally been attributed to the limited utilization of heterogeneous nucleation particles within master alloy systems, resulting in the formation of abundant inactive particles. This study aims to investigate the alternative influences of particles by incorporating external micrometer-sized TiB2 particles into the grain refinement process. Through a series of experiments, the refinement efficiency, grain refinement mechanism, and resultant microstructure of TiB2 particle-induced grain refinement specimens are comprehensively examined using various microscopy and analytical techniques, including polarization microscopy (OM), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and transmission electron microscopy (TEM). Our findings demonstrate a direct correlation between increased levels of TiB2 particles and enhanced grain refinement efficiency. Moreover, the microstructure analysis reveals the distribution of TiB2 particles along grain boundaries, forming a coating due to self-assembly phenomena, while regions with a lower particle content may exhibit irregular grain structures. DSC analysis further confirms reduced undercooling, indicating the occurrence of heterogeneous nucleation events. However, TEM observations suggest that heterogeneous nucleation is not significantly influenced by the growth restriction factor attributed to TiAl3 2DC compounds. The grain refinement mechanism involving TiB2 particles is elucidated to entail both heterogeneous nucleation and physical growth restriction effects. Specifically, a reduction in average grain size is attributed not only to heterogeneous nucleation but also to the physical growth restriction effect facilitated by the TiB2 particle coating. This study offers insights into leveraging particles that do not participate in heterogeneous nucleation within master alloy-based grain refinement systems.

Formation of Twin Boundaries in Commercial Purity Aluminum with Addition of Ti Refiner

On the Faceted and Inclined Twin Boundary of Titanium Carbide Derived from Nanolaminated Ti3AlC2

Phase transformation generating coherent twin boundaries in titanium alloys

Grain Refinement by Trace Tib2 Addition in Conventional Cast Tial-Based Alloy

{332}&Lt;113> Twinning Transfer Behavior and Its Effect on the Twin Shape in a Beta-Type Ti-23.1Nb-2.0Zr-1.0O Alloy

{ 10 1 ̄ 2 } twin–twin intersection-induced lattice rotation and dynamic recrystallization in Mg–6Al–3Sn–2Zn alloy

Twin boundary defects-assisted dual-nanoprecipitation in a selective-laser-melted Al alloy

A Novel Method and Mechanism for Simultaneously Refining Microstructure and Controlling Grain Orientation in Ti48Al2Cr2Nb2.5C Alloy

Synergistic Effect of Twin Consumption Within Lamellae and Slip System Activation at Grain Boundary on the Formation of Nano-Spherical B2 Phase

Dual Grain Refinement Effect for Pure Aluminum with the Addition of Micrometer-Sized TiB2 Particles

Atomic-level characterization of η-twins with non-homogeneous nucleation on the E(Al18Mg3Cr2) phase in 7075 alloy: TEM observations and DFT calculations

A geometrical model for grain boundary migration mediated formation of multifold twins

New Twinning Route in Face-Centered Cubic Nanocrystalline Metals

Influence of Fe on grain nucleation and growth of pure aluminum during refining by Al-Ti-B and Al-Ti-C master alloys

The Formation of {101̅2} Deformation Twin in Hybrid TiB-TiC Reinforced Titanium Matrix Composites

A new insight into heterogeneous nucleation mechanism of Al by non-stoichiometric TiCx

The Formation of $$ \left\{ {10\bar{1}2} \right\} $$ 10 1

The α2 precipitation from equiaxed γ phase in as-cast Ti-44Al-4Nb-2Cr-0.1B alloy

Atomic insights into heterogeneous nucleation and growth kinetics of Al on TiB<sub>2</sub> particles in undercooled Al-5Ti-1B melt

Formation of α-segregation and its impact on grain refinement in Ti-47.5Al-5Nb-2.5V-1Cr alloy

Multiple morphologies and twin structure generated by a definite growth behavior of grain boundary M 23 C 6 in tempered Fe–15Mn–3Al-0.7C steel