Abstract:The non-equilibrium phase evolution during laser powder bed fusion (LPBF) of AlSi10Mg alloy is thoroughly characterized and analyzed by means of advanced electron microscopy and analytical simulation of rapid solidification phenomenon. The evolution of microstructural strengthening agents such as inter-cellular eutectic phase and intra-cellular precipitates is presented in correspondence with the local variation of cellular/dendritic solidification patterns within a typical melt pool. The eutectic phase exhibits two different morphologies: lamellar and fibrous. As with the cell size variation, the overall volume fraction of eutectic phase and the lamella spacing is shown to gradually decrease by moving away from the melt-pool boundary (MPB), i.e., through crossing over from a coarse to a fine cellular zone. The eutectic-free regions within the α-Al cells contain a large number density of nano-sized precipitates that are predominantly Si-rich and are either fully or semi-coherent with the Al matrix. The formation of nano-precipitates is linked to the increased (non-equilibrium) solubility limits of α-Al cells due to the rapid solidification effect. For the first time, we identify such nano-precipitates with non-equilibrium crystal structures and morphologies: "Spheres" and "Ellipsoids" with Face Centered Cubic (FCC), and "Plates" and "Needles" with a Diamond Cubic (DC) superlattice structure that emerges from within the Al matrix. The microstructure in the heat-affected zone (HAZ) right underneath the MPB exhibits an absence of cell boundaries and eutectic phases while consisting primarily of large Si-rich and Mg-rich precipitates. Finally, the local variation of nano-hardness across a solidified melt pool is shown to correlate well with the corresponding profile of microstructural refinement, i.e., exhibiting a minimum at the HAZ and a peak at around the melt-pool centerline. The findings here can significantly advance the state of knowledge for the strengthening behavior in an as-built LPBF-processed AlSi10Mg alloy.

Twin boundary defects-assisted dual-nanoprecipitation in a selective-laser-melted Al alloy

Atomistic and Theoretical Insights on Nanoprecipitates-Controlled Strengthening Behavior for Optimum Mechanical Performance in Nanotwinned NiCoCr Alloys

Effect of Directional Solidification Methods on Solid Solution Window in Ni-based Single-Crystal Superalloy

Atomistic insights into the synergistic effect of nanotwins and nano-precipitates on the mechanical behavior of superalloys

Intrinsic twin boundary of η-MgZn2 precipitates in the AA7050 aluminium alloy

Disclosing Differential Precipitation Behavior of a Novel High Mg-containing Al-Mg-Zn-Si Alloy

Atomic-level characterization of η-twins with non-homogeneous nucleation on the E(Al18Mg3Cr2) phase in 7075 alloy: TEM observations and DFT calculations

{ 10 1 ̄ 2 } twin–twin intersection-induced lattice rotation and dynamic recrystallization in Mg–6Al–3Sn–2Zn alloy

Twin boundary-assisted precipitation of sigma phase in a high-entropy alloy

Icosahedral quasicrystal-enhanced nucleation in Al alloys fabricated by selective laser melting

Unravelling the Local Ring-Like Atomic Pattern of Twin Boundary in an Mg-Zn-Y Alloy

Asymmetrical precipitation on {10-12} twin boundary in magnesium alloy

Formation Mechanism of Dilute Region and Microstructure Evolution in Laser Solid Forming TA15/Ti2AlNb Dual Alloy

Copper segregation-mediated formation of nanotwins and 9R phase in titanium alloys produced by laser powder bed fusion

Rapid Solidification and Non-equilibrium Phase Constitution in Laser Powder Bed Fusion (LPBF) of AlSi10Mg Alloy: Analysis of Nano-precipitates, Eutectic Phases, and Hardness Evolution

The Dislocation-Twin Interaction and Evolution of Twin Boundary in AZ31 Mg Alloy

Tailored microstructures and strengthening mechanisms in an additively manufactured dual-phase high-entropy alloy via selective laser melting

Effects of alloying elements on the cohesion of {101¯1} twin boundary from first-principles calculations

The Formation of Nanoparticles and Their Competitive Interaction with Twins during Eutectic Si Growth

Multi-scale annealing twins generate superior ductility in an additively manufactured high-strength medium entropy alloy

Evolution of dislocation and twin structures in Ti3Al during solidification