Abstract:A popular application of propellant containing of aluminum powder is as fuel for solid rocket motors (SRMs). The combustion gas contains large amounts of alumina particles, which will worsen the SRM thermal protection system by inducing severe mechanical erosion on the surface of the insulation material exposed directly to the high-temperature and high-velocity gas and solid two-phase flow. To protect the structures of SRMs from being damaged, a thermal protection system is required, and it must be optimally designed to be as thin as possible, but thick enough to survive the SRM operating time. To optimize the thickness of insulation material, the particle erosion model should be set up. But most existing particle erosion models are the empirical expressions obtained by experiment or direct reference to pipeline particle erosion models, which limit the application of the model. The ablation process and the flow are coupled with one another. So, to optimize thickness, numerical calculation of dynamic ablation of the insulation material in SRMs should be carried out. In this work, the ethylene propylene diene monomer (EPDM) ablative composite used as heat shield was analyzed. The physical, chemical, and mechanical processes of ablation were expounded. Models for insulation thermal decomposition and thermochemical ablation were constructed, in which pyrolysis and carbonization temperature, pyrolysis rate, latent heat and pyrolysis products, and the main reaction chemical equation of the thermal chemical ablation were researched and confirmed. The coupling of physics, chemistry, and mechanics is through the charring layer in the process of ablation of the insulation material. The charring layer was treated as a porous medium. The ablation models and its numerical method were applied to calculate the ablation of insulation material in an experimental SRM. The computed result is in good agreement with that of the experiment, which shows that the model and numerical method have good accuracy. (C) 2014 American Society of Civil Engineers.

Influence of Different Propellant Systems on Ablation of EPDM Insulators in Overload State

Experimental Investigation on Ablation of EPDM Insulator Based on Ablation Test Motor

Ablation Characteristics and Reaction Mechanism of Insulation Materials under Slag Deposition Condition

Investigation On Ablation Characteristic Of Epdm Insulator Under High Temperature Al2o3 Deposition Condition In Srm

Dynamic Simulation of Insulation Material Ablation Process in Solid Propellant Rocket Motor

Experiment on Ablation of EPDM Insulator Simulating Overload Condition

Experimental investigation of insulator material under conditions simulating solid propellant ramjet

Experiment on ablation characteristic of EPDM insulator under particles erosion condition

Ablation Model of EPDM Insulator under High Acceleration Conditions(ii)——particle Erosion Model of Ablative Material Considering the Porous Structure of Charring Layer Hot Launched Missile

Insulator material screen experiments and ablation characteristic under high acceleration condition

In-depth Study on Reaction Kinetics of Porous Charred Layer with High Temperature Alumina Deposition in Solid Rocket Motor

Ablation and Erosion Characteristics of EPDM Composites under SRM Operating Conditions

Experimental Method Research on Ablation Characteristic of Insulation Material under High Temperature Alumina Droplet Deposition Condition

Flow Field and Ablation Mode Analysis of Insulator under Low Acceleration with Long Operation Time Conditions for Solid Rocket Motor

Experiment Study of Effects Induced by Overload on SRM Performance

Harmonizing Lightweight and Ablation Resistance: Design and Performance of Multilayer Composite Insulation Materials for Solid Rocket Motors

Simulated Experiment on Case Overheating Failure of Solid Rocket Motor under Flight Overload Condition

A Study on the Ablation Performance and Mechanisms of G10 Insulators in a Supersonic Plasma Flame

Charring layer structure character of EPDM insulator in simplex thermo-chemical ablation environment

Experimental Analysis of Characteristic of SRM Insulator Eroded by Highly Concentrated Particles

Ablation model of insulation in oxygen-rich environment