Abstract:Aramid fiber (AF)/epoxy composites are often used as mechanical and insulating materials for ultra-high voltage (UHV) gas-insulated switchgear (GIS) insulation pull rods. However, the product performance is believed to be restricted by the poor adhesion between AF and the resin matrix, affecting the operation reliability of GIS. In this work, a cascade process was applied to modify the AF surface to improve interfacial behavior. The AF was first treated with air dielectric barrier discharge (DBD) at atmospheric pressure to obtain a rough surface and then reacted with toluene-2,4-diisocyanate (TDI) to introduce polar functional groups onto the surface. The plasma discharge power and treatment time were investigated as major parameters, and the aging effect was studied. The modified AF was characterized by scanning electron microscope (SEM), Fourier transform infrared spectrometer (FTIR), x-ray photoelectron spectroscopy (XPS), atomic force microscope (AFM), and filament yarn tensile test. The interfacial behavior of the AF/epoxy composite was analyzed by interfacial shear strength (IFSS) test of micro-bond specimen and interlaminar shear strength (ILSS) test of Naval Ordnance Laboratory (NOL) rings. Experimental results showed that polar functional groups were introduced onto the AF surface. The IFSS and ILSS of AF/epoxy composite were increased by 32.8% and 20.2% at most, respectively, and the tensile strength of the AF was mostly preserved. Moreover, with the increase in plasma discharge power, the interfacial strength of the modified AF/epoxy interface increased firstly and then decreased. The AF modified by TDI retained a relatively good modification effect after aging for some time. This study presents a cascade process for the AF surface modification with simplicity, effectiveness, and resource-saving, which is suitable for industrial applications.

Synergetic effect of aramid fiber and carbon fiber to enhance ablative resistance of EPDM-based insulators via constructing high-strength char layer

Synergistic Effects of Micro-hBN and Core-Shell Nano-TiO2@SiO2 on Thermal and Electrical Properties of Epoxy at High Frequencies and Temperatures

Synergistic enhancement of arc ablation resistance and mechanical properties of epoxy resin insulation

In situ construction of fiber‐supported micro‐porous char structure to enhance anti‐ablative performance of silicone rubber composites

Effect characteristics of ANFs/SiO2 layer self-assembly on the insulation properties of aramid/epoxy composites

Enhancement of Para-Aramid Fibers by Depositing Poly-P-paraphenylene Terephthalamide Oligomer Modified Multi-Walled Carbon Nanotubes

Rapid and Scalable Synthesis of Novel Carboxylated Aramid Nanofibers for Simultaneously Improving the Strength and Toughness of Carbon Fiber/epoxy Laminates

Improving ablation properties of liquid silicone rubber composites by in situ construction of rich‐porous char layer

Effect of Various Fibers on the Ablation Resistance of Poly(diaryloxyphosphazene) Elastomer

Silicone-grafted epoxy/carbon fiber composites with superior mechanical/ablation performance

Surface Modification of Aramid Fiber by Cascade Process with Atmospheric Plasma and TDI Grafting

Enhanced ablation resistance of phenolic composites through the construction of a sea-island nanostructured char layer via in-situ catalytic graphitization of incorporated Salen-Ni complex

Unraveling the Ablative Behavior Through the Design of a POSS-Benzoxazine/EPDM Network under Harsh Environments

Effects of SiO 2 -coated CNTs on the directional formation of SiC whiskers and improvement in the ablative resistance of polymer-matrix composites

Significantly improved ablation properties under high heat flux environment based on carbon fiber reinforced Zr-doped silicone rubber

In-situ constructing SiC frame in silicone rubber to fabricate novel flexible thermal protective polymeric materials with excellent ablation resistance

Aramid fiber reinforced EPDM microcellular foams: Influence of the aramid fiber content on rheological behavior, mechanical properties, thermal properties, and cellular structure

Improved dielectric and mechanical properties of aramid fiber reinforced epoxy resin composites by polyethyleneimine grafting

Improving high heat flux ablation resistance of silicone rubber composites by laying low-areal-density carbon fiber fabrics

Controlled pyrolysis of epoxy through highly silicone-branched structures to construct a compact porous char layer for ablation resistant coatings

Enhancing ablation and oxidation resistance of phenolic resin with modified pickling asbestos