Abstract:R&D of high field accelerator magnets is ongoing at the Institute of High Energy Physics, Chinese Academy of Sciences (IHEP, CAS) for pre-study of the next-generation high energy colliders like Super Proton-Proton Collider (SPPC), Future Circular Collider (FCC) and etc. A 12.47-T main field at 4.2 K has been attained in 2021 within two 14-mm apertures of LPF1-U, a superconducting model dipole magnet with Nb 3 Sn & NbTi combined common-coil configuration. Based on the experiences mastered in the LPF1 series magnets, a 16-T high field dipole magnet named LPF3 has been designed, fabricated and is in the performance test process. LPF3 is also a combined magnet with six racetrack Nb 3 Sn coils outside, expected to provide a 13-T main field within two 50-mm apertures, and with inserted HTS coils to enhance the field up to 16 T or even higher. The 13-T Nb 3 Sn dipole magnet, named LPF3-LTS, incorporates a graded common-coil configuration to enhance superconductor efficiency. The optimization of coil layouts includes varying bending radii (BR) and lengths of straight sections (LSS) to mitigate field accumulation in the outer four coils near the central posts and coil ends, respectively. Several Rutherford cables over 200 meters were fabricated for the coils winding, and with the maximum strands count of 42. The support structure for LPF3-LTS has adopted a shell-based design, with an improved “Bladder & Key” technology. Dedicated hydraulic pistons were investigated and utilized to replace the traditional bladders. The main design characteristics, fabrication process and some preliminary test results of the magnet are presented in this paper.

Design of the Integral Field Measurement System of Dipole Magnets

Design of Prototype Magnets for HUST Proton Therapy Beamline

Design of the Fast Scanning Magnets for HUST Proton Therapy Facility

Design of Gantry Beamline for HUST Proton Therapy Facility

Prototype Development of the Beam Diagnostic System of a Proton Therapy Facility Based on a Superconducting Cyclotron

Electromagnetic Design, Fabrication and Test of LPF1:a 10.2 T Common-Coil Dipole Magnet with Graded Coil Configuration

Mechanical Design, Assembly and Strain Measurement Results of a 13-T Superconducting Dipole Magnet

Design and Development of the Beamline for a Proton Therapy System

Magnetic Field Measurement, Shimming and Processing for 230 MeV Superconducting Cyclotron Main Magnet

Design and Fabrication of a 13-T Twin-Aperture Superconducting Dipole Magnet with Graded Common-Coil Configuration

Magnetic Design Study of the High-Field Common-Coil Dipole Magnet for High-Energy Accelerators

Magnetic Field Tolerance of Dipole and Quadrupole Magnets for XiPAF Synchrotron

Design, Construction, Installation, Mapping and Shimming for a 416 Ton Compact Cyclotron Magnet

Design and Test of Superconducting Magnet for 200 MeV Proton Cyclotron

Design and Testing of a Prototype Canted-Cosine-Theta HTS Dipole Magnet Using CORC Cable

Mechanical Design of FECD1 at IHEP: a 12-T Hybrid Common-coil Dipole Magnet

2-D Mechanical Design Study of A 20-T Two-In-One Common-Coil Dipole Magnet for High-Energy Accelerators

Field Mapping System Design for the Superconducting Cyclotron CYCIAE-230

The Design of Magnetic Field Measurements System for CYCIAE-100

Development and Measurement of a Fast Kicker Magnet Applied to a Proton Therapy Facility

Design and simulation of vacuum system in energy selection section for HUST-PTF