Abstract:HfO2-based resistive random-access memory (RRAM) with a Ti buffer layer has been extensively studied as an emerging nonvolatile memory (eNVM) candidate because of its excellent resistive switching (RS) properties and CMOS process compatibility. However, a detailed understanding of the nature of Ti thickness-dependent RS and systematic thermal degradation research about the effect of post-metallization annealing (PMA) time on oxygen vacancy distribution and RS performance still needs to be included. Herein, the impact of Ti buffer layer thickness on the RS performance of the Al/Ti/HfO2/TiN devices is first addressed. Consequently, we have proposed a simple strategy to regulate the leakage current, forming voltage, memory window, and uniformity by varying the thickness of the Ti layer. Moreover, it is found that the device with 15 nm Ti shows the minimum cycle-to-cycle variability (CCV) and device-to-device variability (DDV), good retention (105 s at 85 °C), and superior endurance (104). In addition, thermal degradation of the Al/Ti(15 nm)/HfO2/TiN devices under different PMA times at 400 °C is carried out. It is found that the leakage current increases and the forming voltage and memory window decrease with the increase in PMA time due to the thermally activated oxidation of the Ti. However, when the PMA time increases to 30 min, the Ti can no longer capture oxygen from HfO2 due to the formation of self-limited TiOx. Therefore, the device shows superior thermal stability with a PMA time of 90 min at 400 °C and no degradation of the memory window, uniformity, endurance, or retention. This work demonstrates that the Ti/HfO2-based RRAM shows superior back-end-of-line compatibility with high thermal stability up to 400 °C for over an hour.

Improved Switching Reliability Achieved in HfOx Based RRAM with Mountain-Like Surface-Graphited Carbon Layer

Ti/HfO2-Based RRAM with Superior Thermal Stability Based on Self-Limited TiOx

Understanding the Switching Oxide Defect Formation and Recovery on HfOx Based RRAM Device

Uniform,fast,and Reliable CMOS Compatible Resistive Switching Memory

Multilevel resistive switching in HfOx/TiOx/HfOx/TiOx multilayer-based RRAM with high reliability

Enhancement of Resistive Switching Performance in Hafnium Oxide (HfO2) Devices via Sol-Gel Method Stacking Tri-Layer HfO2/Al-ZnO/HfO2 Structures

Zinc-Alloyed HFO2 Synaptic RRAM with Operating Voltage and Switching Energy Enhancement

HfO2-Based RRAM with in Situ Conductive Channels Induced by Nanoparticles to Improve Stability

Interface Engineering With Mos2-Pd Nanoparticles Hybrid Structure For A Low Voltage Resistive Switching Memory

Tuning oxygen vacancies and resistive switching properties in ultra-thin HfO2 RRAM via TiN bottom electrode and interface engineering

Design of CMOS Compatible, High‐Speed, Highly‐Stable Complementary Switching with Multilevel Operation in 3D Vertically Stacked Novel HfO2/Al2O3/TiOx (HAT) RRAM

Low Power and High Uniformity of HfOx-based RRAM Via Tip-Enhanced Electric Fields

Improving Analog Switching in HfOx-Based Resistive Memory with a Thermal Enhanced Layer

Resistive Switching Behaviours and Novel Device Applications of Metal-Oxide-Si/Ge Structures

Novel Vertical 3D Structure of TaO X -Based RRAM with Self-localized Switching Region by Sidewall Electrode Oxidation

Insight into interface behavior and microscopic switching mechanism for flexible HfO2 RRAM

Improved Al 2 O 3 RRAM performance based on SiO 2 /MoS 2 quantum dots hybrid structure

Demonstrate High R-OFF/R-ON Ratio and Forming-Free RRAM for Rfpga Application Based on Switching Layer Engineering

Oxide-based RRAM: Unified microscopic principle for both unipolar and bipolar switching

Improved Al2O3 RRAM Performance Based on SiO2/MoS2 Quantum Dots Hybrid Structure

Optimizing molybdenum oxide based RRAM with vacuum rapid thermal annealing and carbon quantum dots