Abstract:Single-crystal silicon (c-Si) is a vital component of photonic devices and has obvious advantages. Moreover, femtosecond-pulsed laser interactions with matter have been widely applied in micro/nanoscale processing. In this paper, we report the modification mechanisms of c-Si induced by a femtosecond laser (350 fs, 520 nm) at different pulse fluences, along with the mechanism of this technique to trim the phase error of c-Si-based devices. In this study, several distinct types of final micro/nanostructures, such as amorphization and ablation, were analyzed. The near-surface morphology was characterized using optical microscopy, scanning electron microscopy, and atomic force microscopy. The main physical modification processes were further analyzed using a two-temperature model. By employing Raman spectroscopy, we demonstrated that a higher laser fluence significantly contributes to the formation of more amorphous silicon components. The thickness of the amorphous layer was almost uniform (approximately 30 nm) at different induced fluences, as determined using transmission electron microscopy. From the ellipsometry measurements, we demonstrated that the refractive index increases for amorphization while the ablation decreases. In addition, we investigated the ability of the femtosecond laser to modify the effective index of c-Si microring waveguides by either amorphization or ablation. Both blue and red shifts of resonance spectra were achieved in the microring devices, resulting in double-direction trimming. Our results provide further insight into the femtosecond laser modification mechanism of c-Si and may be a practical method for dealing with the fabrication errors of c-Si-based photonic devices.

Ion Implantation in Silicon for Photonic Device Trimming

Post-Processing Trimming of Silicon Photonic Devices Using Femtosecond Laser.

Large Bidirectional Refractive Index Change in Silicon-rich Nitride via Visible Light Trimming

Post-Fabrication Trimming of Silicon Photonic Ring Resonators at Wafer-Scale

Simultaneous optical power insensitivity and non-volatile wavelength trimming using 2D In 4/3 P 2 Se 6 integration in silicon photonics

A Universal Approach to High-Index-Contrast Flexible Integrated Photonics

Photonic integrated circuits fabricated using quantum well intermixing

Ion implantation in 1.3μm VCSEL structure

Quantum Well Intermixing For The Realization Of Photonic Integrated Circuits

Modifying single-crystal silicon and trimming silicon microring devices by femtosecond laser irradiation

Quantum-Well Intermixing For Optoelectronic Integration Using High-Energy Ion-Implantation

Efficient activation of telecom emitters in silicon upon ns pulsed laser annealing

InP nanocrystals on silicon for optoelectronic applications

Ion Implantation Damage Recovery in GeSn Thin Films

Germanium based photonic components toward a full silicon/germanium photonic platform

Post trimming of silicon photonics microresonators by nanoscale flash memory technology

Scalable Non‐Volatile Tuning of Photonic Computational Memories by Automated Silicon Ion Implantation (Adv. Mater. 8/2024)

High Speed Precise Refractive Index Modification for Photonic Chips through Phase Aberrated Pulsed Lasers

A Nanomembrane-Based Bandgap-Tunable Germanium Microdisk Using Lithographically-Customizable Biaxial Strain for Silicon-Compatible Optoelectronics

In-Situ Study of Dynamics of Refractive Index Changes in Silicon Devices Induced by UV-light Irradiation

Micrometer-scale InP selectively grown on SOI for fully integrated Si-photonics