Abstract:Two-dimensional (2D) layered molybdenum ditelluride (2H-MoTe2) has attracted tremendous research interest for enabling device applications with unconventional features and performance. Forming p–n homojunctions turns out to be very crucial for the device applications in photovoltaic detectors. Here, indium (In) surface electron transfer doping is found to be an efficient way to form an air-stable p–n homojunction in the MoTe2 flakes. With different thickness In layers depositing on the MoTe2, the carrier mobility of the MoTe2 flake is rationally modulated, and its electron mobility is enhanced from 0.2 to 19 cm2 V–1 s–1. The effective carrier modulation of the MoTe2 with In electron doping enables to achieve lateral and vertical p–n homojunctions formed in the flake. The photoresponsivity of the lateral photovoltaic detector is about 6 mA/W at 532 nm and 4 mA/W at 1064 nm. The photoresponsivity of the vertical device (Pt/MoTe2/In/Au) is about 125 mA/W at 532 nm and 100 mA/W at 1064 nm. These results would be beneficial for fabricating future 2D semiconductor-based optoelectronic devices.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaelm.1c00407.Details of the electrode transfer method; characterization of the thin In film with different thicknesses; scanning photocurrent image of the partially In-doped MoTe2 FET with focused 1064 nm laser; detailed surface potentials of the lateral MoTe2 homojunction; characteristics of a Pt-contacted MoTe2 FET; scanning photocurrent image of the vertical Pt/MoTe2/In/Au device with focused 1064 nm laser; photocurrent response of the vertical Pt/MoTe2/indium/Au device; and photovoltage response of the vertical Pt/MoTe2/indium/Au device (PDF)This article has not yet been cited by other publications.

Carrier Modulation of Ambipolar Few‐Layer MoTe2 Transistors by MgO Surface Charge Transfer Doping

Modulation of Electrical Properties with Controllable Local Doping in Multilayer MoTe 2 Transistors

Conversion of Charge Carrier Polarity in MoTe2 Field Effect Transistor via Laser Doping

The non-volatile electrostatic doping effect in MoTe2 field-effect transistors controlled by hexagonal boron nitride and a metal gate

Strain Engineering for Enhancing Carrier Mobility in MoTe2 Field-Effect Transistors

Quasi‐Continuous Tuning of Carrier Polarity in Monolayered Molybdenum Dichalcogenides Through Substitutional Vanadium Doping

Lateral and Vertical p–n Homojunctions Formed in Few-Layer MoTe 2 with In Surface Charge-Transfer Doping

Thickness-dependent Carrier Polarity of MoTe2 Transistors with NiTe2 Semimetal Contacts

MoTe2 P–n Homojunctions Defined by Ferroelectric Polarization

Dielectric engineering enable to lateral anti-ambipolar MoTe 2 heterojunction

Substitutionally Doped MoSe2 for High-Performance Electronics and Optoelectronics.

Homogeneous 2D MoTe2 CMOS Inverters and P-N Junctions Formed by Laser-Irradiation-Induced P-Type Doping.

Substitutionally Doped MoSe 2 for High‐Performance Electronics and Optoelectronics

Controlling Polarity of MoTe2 Transistors for Monolithic Complementary Logic via Schottky Contact Engineering

Enhanced Photoresponsivity and Hole Mobility of MoTe2 Phototransistors by Using an Al2O3 High-Κ Gate Dielectric

Nonvolatile and Programmable Photodoping in MoTe 2 for Photoresist-Free Complementary Electronic Devices.

Metallic Transport in Monolayer and Multilayer Molybdenum Disulfides by Molecular Surface Charge Transfer Doping

MoTe2 Field-Effect Transistors with Low Contact Resistance through Phase Tuning by Laser Irradiation

Reconfigurable MoTe2 Field-Effect Transistors and Its Application in Compact CMOS Circuits

Largely Reducing the Contact Resistance of Molybdenum Ditelluride by In Situ Potassium Modification

High‐Performance Large‐Scale Vertical 1T'/2H Homojunction CVD‐Grown Polycrystalline MoTe2 Transistors