Abstract:Gain reference antenna is an important part of over-the-air (OTA) measurement system using antenna gain substitution method. Without an accurate gain reference antenna, the measurement results of such system are envisaged to lead to a biased evaluation of the antenna gain. Furthermore, such antenna might be susceptible to undesirable currents on the coaxial cable during the measurement, whereby the actual measured radiation pattern can be distorted causing significant differences from its expected radiation pattern. These undesirable currents are known as common-mode (CM) current. In this work, a novel gain reference dipole antenna (GRDA) with minimal CM current effects has been proposed. It achieves less than 0.2-dB radiation pattern ripple from the ideal omnidirectional radiation performance within the 4.2–4.9-GHz frequency band. The GRDA achieves vertical polarization and omnidirectional radiation by employing an array of four folded wideband high-efficiency electromagnetic structure (WHEMS) antennas with dimensions of mm. This proposed design overturns the classic design concept of the traditional dipole antenna. To suppress the CM current, a microstrip type-III balun with two ground points placed symmetrically around the middle of the radiating element has been designed. This design allows for the integration of a type-III balun into the radiator, so as to achieve the effect of the balun while maintaining the desired GRDA pattern. The measurement results show that the GRDA proposed in this work achieves a symmetrical pattern, suppresses CM current, and attains a quantifiable gain of around 1.5 dBi within a 15% bandwidth, making it an ideal choice for gain calibration of OTA measurement systems.

A New Method of VHF Antenna Gain Measurement Based on the Two-ray Interference Loss

Wireless Network Signal Recession Measurement Method and Simulation

An Improved Indirect Time-domain Technique on Lower Frequency Antenna

Active-passive joint measurement and evaluation method for precision of noise test system

An Efficient Total Radiated Power Test Method Based on Optimal Interpolation over a Sphere of Large Antenna Array

High-Efficiency 2-D Multibeam Rectenna Based on Gain Enhanced Patch Array

A New Hybrid Equivalent Modeling Method of Low-Frequency Radiation Source Based on GS and JADE Algorithms and Phaseless Near-Field Data

A Novel Gain Reference Dipole Antenna for Accurate Calibration of Over-the-Air Measurement Systems

A Simple System for Measuring Antenna Radiation Patterns in the Wi-Fi Band

An Effective Equivalent Radiation Source Based on Near-field Scanning for Electromagnetic Interference Estimation

Patch Antenna Radiation Pattern Evaluation Based on Phaseless and Single-Plane Near-Field Scanning

Measurement of Phase Center for Antenna with the Method of Moving Reference Point

Multi-Taper-Based Automatic Correction of Non-Anechoic Antenna Measurements

An EIRP Measurement Method of High-Power Microwave Systems Based on Near-Field Testing

A method to enhance the accuracy of radio frequency power measurements in particle accelerator high‐frequency systems

A New Method for Measuring the Properties of Dielectric Materials

Measurement Uncertainty of Antenna Efficiency Measured Using the Two-Antenna Method in a Reverberation Chamber

A novel method of interference source direction-finding with an existing single antenna beam in communication satellites

A Calibrated Over-the-Air Measurement Method for Error Vector Magnitude Characterization

Study on System Design and Variation of Vehicle Antenna Eccentricity test

Antenna Delay Calibration in an IR-UWB Radar Simulated by Vector Network Analyzer