Abstract:Gain reference antenna is an important part of over-the-air (OTA) measurement system using antenna gain substitution method. Without an accurate gain reference antenna, the measurement results of such system are envisaged to lead to a biased evaluation of the antenna gain. Furthermore, such antenna might be susceptible to undesirable currents on the coaxial cable during the measurement, whereby the actual measured radiation pattern can be distorted causing significant differences from its expected radiation pattern. These undesirable currents are known as common-mode (CM) current. In this work, a novel gain reference dipole antenna (GRDA) with minimal CM current effects has been proposed. It achieves less than 0.2-dB radiation pattern ripple from the ideal omnidirectional radiation performance within the 4.2–4.9-GHz frequency band. The GRDA achieves vertical polarization and omnidirectional radiation by employing an array of four folded wideband high-efficiency electromagnetic structure (WHEMS) antennas with dimensions of mm. This proposed design overturns the classic design concept of the traditional dipole antenna. To suppress the CM current, a microstrip type-III balun with two ground points placed symmetrically around the middle of the radiating element has been designed. This design allows for the integration of a type-III balun into the radiator, so as to achieve the effect of the balun while maintaining the desired GRDA pattern. The measurement results show that the GRDA proposed in this work achieves a symmetrical pattern, suppresses CM current, and attains a quantifiable gain of around 1.5 dBi within a 15% bandwidth, making it an ideal choice for gain calibration of OTA measurement systems.

A Calibrated Over-the-Air Measurement Method for Error Vector Magnitude Characterization

Over-the-air Noise Temperature Measurement

A Vector Method for Determining Voltage Standing Wave Ratio of Radio Communication

Measurement uncertainty of reverberation chamber and its reduction techniques for over-the-air tests: a review

Over-the-Air Phase Calibration Methods for 5G mmW Antenna Array Transceivers

Measurement Error Detection for Calibration Standards Based on Cluster Analysis

Broadband Measurement of Error Vector Magnitude for Microwave Vector Signal Generators Using a Vector Network Analyzer

A Review of Over-the-Air Testing Methods for Performance Measurement of Antennas and Devices in Communication Systems

Efficient Angle Calibration Method for Peak Beam Measurements in Transmitarray-Based Compact Antenna Test Range

A Sensing-Based Over-the-Air Phased Array Antennas Phase Calibration Method With Greedy Algorithm

Over-the-Air Radiated Testing of Millimeter-Wave Beam-Steerable Devices in a Cost-Effective Measurement Setup.

5G Over-the-Air Measurement Challenges: Overview

Over-the-Air Antenna Array Calibration for mmWave Hybrid Beamforming Systems Based on Monte Carlo Markov Chain Method

An Efficient OTA Calibration and Pattern Estimation Method for 5G Mmwave Large-Scale Arrays

Calibration For Spaceborne Phased Array Antennas Without Interrupting Satellite Communications

Antenna Measurement in Outdoor Environment Based on a Unmanned Aerial Vehicle

Overview of State-of-the-art OTA Measurements of Wireless Devices in Reverberation Chamber

A Novel Gain Reference Dipole Antenna for Accurate Calibration of Over-the-Air Measurement Systems

A Low Complexity Approach for Calibration and Characterization of a Millimeter Wave Phased-Array Transceiver-Antenna Module

A Generalized Wireless Cable Over-the-Air Testing Framework for Arbitrary Field Emulation in Nonanechoic Radio Environment

A Self-calibration Method for Gain-Phase Errors of Airborne Antenna Array Using Multiple Measurements