Abstract:Electromagnetic reverberation chamber has been widely used in radiated-immunity test due to its low construction cost,short experimental time,effective simulation of the real electromagnetic environment,accurate test result,enhanced test repeatability,small measurement uncertainty,and so on.The application of the reverberation chamber requires a calibration before the EMI/EMS tests,in which statistical analysis of the calibration data proves the field homogeneity in the working volume and provides the necessary parameters for EMI/EMS tests.The key parameters include field uniformity,quality factor,average normalized electric field,receive antenna calibration factor and insertion loss,among which receive antenna calibration factor and insertion loss are the basic parameters to obtain the electromagnetic emission power.In this paper,in order to verify repeatability of the test in reverberation chamber,the antenna calibration factor and insertion loss of our developed reverberation chamber is investigated at the calibration stage.Calibrations with different transmit antenna positions and directions are investigated by measurement carefully.It is indicated that the key parameters of the reverberation chamber have good testing repeatability and this will ensure good test repeatability for electromagnetic susceptibility test and electromagnetic emission test.The test results prove that there is a time-averaged spatially homogenous field distribution inside the chamber.All test results reveal that this reverberation chamber conforms to the specification of the IEC standard and can be used in the common EMC test. All the test result will be useful for investigation of the mechanism of the reverberation chamber.

Measurement Uncertainty of Antenna Efficiency Measured Using the Two-Antenna Method in a Reverberation Chamber

Statistical Analysis of Antenna Efficiency Measurements with Non-Reference Antenna Methods in a Reverberation Chamber.

Statistical Estimation of Measured Antenna Efficiency Using Non-reference Antenna Methods

Uncertainty of Validating Semi-Anechoic Chambers for Radiated Emmision Measurement

An Efficient Total Radiated Power Test Method Based on Optimal Interpolation over a Sphere of Large Antenna Array

Reflection of Transmitting Antenna in Reverberation Chamber and Its Effect on Chi-square Validation

Reverberation Chamber Stirring Method Based on Phased Array Antenna and Frequency Stirring Techniques

Antenna Radiation Pattern Reconstruction Based on Spherical Wave Decomposition in Imperfect Reverberation Chamber

Transmitting Antenna's Reflected Power and Its Influence on Reverberation Chamber Calibration

An Improved Method for Reconstructing Antenna Radiation Pattern in a Loaded Reverberation Chamber

Rigorous characterization of EMC antennas

Patch Antenna Radiation Pattern Evaluation Based on Phaseless and Single-Plane Near-Field Scanning

Testing Investigation of Antenna Calibration Factor and Insertion Loss of a Reverberation Chamber

A Reverberation Chamber for Antenna Measurements up to 140 GHz

AN EQUIVALENT CIRCUIT MODELING METHOD FOR ULTRA-WIDEBAND ANTENNAS

Evaluation Of Transmit Antenna Position In Reverberation Chamber

Measurement of the Quiet Zone Performance of Microwave Anechoic Chamber

Measurement of Phase Center for Antenna with the Method of Moving Reference Point

Multi-Taper-Based Automatic Correction of Non-Anechoic Antenna Measurements

On the Antenna Illumination Effects in Monostatic Reflectivity Determination for Microwave Calibration Targets

Improved Planar Near-Field Measurement Based on Data Assimilation