Abstract:Despite recent advances and improvements in modeling and prediction of the dynamics of the machining process, an efficient machining process is limited due to chatter and instability of machining system. In fact, the machining system contains various kinds of joints, which cause difficulties in dynamics modeling, simulation and prediction. Moreover, the flexible support system results in large deformation and violent vibration of the workpiece when machining, and the thin-walled workpiece easily gives rise to the chatter of the machining system. Therefore, the dynamics of the flexible support system was considered to calculate stability lobe diagram in the modeling of milling process. The whole machining system was regarded as a closed loop composed by the machine tool structures, support, workpiece and machining process. In this paper, the receptance coupling (RC) method was introduced to predict the dynamics of the closed machining system. A milling process was taken for example to predict the chatter limitations using the dynamics of closed model. The mathematical model of the machining system (machine tool structures, spindle, holder and tool), together with the details of joint contacts, was given based on the RC method. The RC model was used to obtain the dynamics of the system, while receptance of the tool point was coupled. Based on the coupling model of the machining system, the depth limitations under different speeds were estimated for the technology parameter optimization in milling process. The response was considered to be the sum of the cutting point and the support system. The flexibility of the support system was considered to be the feedback of the cutting stiffness. By this means, the traditional model was modified to calculate the stability lobe diagram based on the dynamics of the spindle and support system. Furthermore, the milling experiment was carried out to verify the prediction results, and the dominant natural frequencies of receptance at tool point were obtained by modal testing to define the stability lobe diagram. It was found that the chatter results matched well with the stability lobes. It was concluded that the support system with poor stiffness might cause violent chatter especially when the workpiece was thin-walled. The cutting depth limitations of the flexible support system were lower than that of the rigid one. Moreover, this closed model of the machining system is appropriate for the chatter prediction of the flexible support system or thin-walled workpiece, so it is helpful for a better parameter optimization.

Optimization and Improvement of Stable Processing Condition by Attaching Additional Masses for Milling of Thin-Walled Workpiece

Experimental and simulation study on chatter stability region of integral impeller with non-uniform allowance.

Parameter Optimization of Time-Varying Stiffness Method for Chatter Suppression Based on Magnetorheological Fluid-Controlled Boring Bar

Milling Error Prediction of Thin-Walled Parts During High-Speed Machining

Investigation of Moving Fixture on Deformation Suppression During Milling Process of Thin-Walled Structures

Finite Element Simulation and Analysis of Deformation in Machining of Aeronautical Aluminum Alloy Thin-Walled Workpiece

Investigation on chatter stability of thin-walled parts milling considering the effects of fixture support force and tool position

A State-of-the-Art Review on Chatter Stability in Machining Thin−Walled Parts

Research on milling stability of thin-walled parts based on improved multi-frequency solution

Structure Design Improvement and Stiffness Reinforcement of a Machine Tool through Topology Optimization Based on Machining Characteristics

An improved time-varying stability analysis of micro milling considering tool wear

Dynamics Modeling-Based Optimization of Process Parameters in Face Milling of Workpieces with Discontinuous Surfaces

Energy Modeling for Variable Material Removal Rate Machining Process: an End Face Turning Case

Analysis and Optimization of Parameters of Machine Tool in Structure Design Based on the Cutting Dynamics with Uncertainty

Stability analysis of thin-walled parts end milling considering cutting depth regeneration effect

Study the effect of anti-vibration edge length on process stability of milling thin-walled Ti-6Al-4V alloy

Suppress Chatter in Milling of Thin-Walled Parts Via Fixture with Active Support

Prediction of time-varying dynamics and chatter stability analysis for surface milling of thin-walled curved CFRP workpiece

Stability Prediction of Milling Process with Closed Machining System Dynamics with Flexible Thin-Walled Workpiece

Digital Modeling-Driven Chatter Suppression for Thin-Walled Part Manufacturing

Research on the influence of robot structural mode on regenerative chatter in milling and analysis of stability boundary improvement domain