Abstract:This work describes the covalently binding of 2-hydroxyethyl methacrylate (HEMA) and 2-(dimethylamino)ethyl methacrylate(DMAEMA) brushes onto the poly(vinylidene fluoride) (PVDF) membrane surfaces via surface-initiated atom transfer radical polymerization (ATRP). Prior to ATRP, PVDF was coated with 3,4-dihydroxyphenylalanine (DOPA). The hydroxyl groups on the polyDOPA-coated PVDF membrane surface and pore surface were used for the immobilization of alkyl halide ATRP initiator. The grafting yield of poly(hydroxyethyl methacrylate) (PHEMA) and poly((dimethylamino)ethyl methacrylate) (PDMAEMA) was determined by weight gain which was linearly increased with the polymerization time. Fourier transform infrared spectrometer (FT-IR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and atomic force microscope (AFM) were used to characterize the chemical composition and surface morphology of PVDF membrane and modified membrane, respectively. Water contact angles and water intake measurements indicated that the introduction of PHEMA graft chains promoted remarkably the surface hydrophilicity of PVDF membranes. It was also found that PHEMA graft chains provided higher pure water flux and better anti-protein absorption ability to PVDF membranes. Water flux decreased with increasing polymerization times, while the BSA rejection curves shifted to lower molecular weight cutoff values. The quaternized PVDF-g-PDMAEMA, PVDF-g-PDMAEMA-b-PHEMA membranes exhibited excellent antibacterial properties against Staphylococcus aureus. This study not only introduces a modification approach to obtain a PVDF membrane grafting hydrophilic PHEMA, but also provides the antibacterial properties for PVDF membrane with PDMAEMA. (C) 2011 Elsevier B.V. All rights reserved.

Development of Antifouling Poly(vinyl Chloride) Blend Membranes by Atom Transfer Radical Polymerization

Improved Antifouling Properties of Polyvinyl Chloride Blend Membranes by Novel Phosphate Based-Zwitterionic Polymer Additive

Influence of polyvinyl alcohol on the surface morphology, separation and anti-fouling performance of the composite polyamide nanofiltration membranes

Improving Hydrophilicity And Protein Resistance Of Poly(Vinylidene Fluoride) Membranes By Blending With Amphiphilic Hyperbranched-Star Polymer

Antifouling and Antibacterial Behavior of Membranes Containing Quaternary Ammonium and Zwitterionic Polymers

Improving The Antifouling Property Of Poly(Vinyl Chloride) Membranes By Poly(Vinyl Chloride)-G-Poly(Methacrylic Acid) As The Additive

Modification of poly(vinylidene fluoride)/polyethersulfone blend membrane with polyvinyl alcohol for improving antifouling ability

Poly(vinylidene Difluoride)/poly(tetrafluoroethylene-Co-vinylpyrrolidone) Blend Membranes with Antifouling Properties.

Surface Modification of Polyvinylidene Fluoride Membrane by Atom-Transfer Radical-Polymerization of Quaternary Ammonium Compound for Mitigating Biofouling

Antifouling Pvdf Ultrafiltration Membranes Incorporating Pvdf-G-Phema Additive Via Atom Transfer Radical Graft Polymerizations

Improving Antifouling Ability and Hemocompatibility of Poly(Vinylidene Fluoride) Membranes by Polydopamine-Mediated Atrp

Preparation of Enduringly Antifouling Pvdf Membrane with Compatible Zwitterionic Copolymer Via Thermally Induced Phase Separation

Relationship Between Polymers Compatibility and Casting Solution Stability in Fabricating PVDF/PVA Membranes

Structures and Antifouling Properties of Polyvinyl Chloride/poly(methyl Methacrylate)-Graft-poly(ethylene Glycol) Blend Membranes Formed in Different Coagulation Media

Antifouling Properties of Poly(vinyl Chloride) Membranes Modified by Amphiphilic Copolymers P(MMA- B -MAA)

Antifouling PVDF Membrane with Hydrophilic Surface of Terry Pile-Like Structure

Polyvinylidene Fluoride Membrane Blended with Quaternary Ammonium Compound for Enhancing Anti-Biofouling Properties: Effects of Dosage

Synthesis of Well-Defined PVDF-Based Amphiphilic Block Copolymer via Iodine Transfer Polymerization for Antifouling Membrane Application

Antifouling and Antibacterial Improvement of Surface-Functionalized Poly(vinylidene Fluoride) Membrane Prepared Via Dihydroxyphenylalanine-Initiated Atom Transfer Radical Graft Polymerizations

Synthesis of amphiphilic functional terpolymers towards preparation of high flux, anti-fouling, micropollutant-capturing ultrafiltration membranes

Preparation of Antifouling Membrane from PVC/PSf Blends