Abstract:Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, Ahead of Print. In order to investigate the effect of suction surface synthetic jet on the aerodynamic performance of transonic axial compressor, Rotor35 was used for numerical simulation. The results show that at four different positions, the stability margin of the compressor is slightly reduced by suction surface excitation, but there is an optimal position that can improve the compressor total pressure ratio and efficiency. At this position, there is little change in the total pressure ratio at the peak efficiency, and the efficiency is improved by 0.58%. The total pressure ratio and efficiency of the design point are increased by 0.18% and 0.55%, respectively. The periodic excitation of synthetic jet can effectively separate the suction surface and reduce the separation loss, which is the reason for the improvement of compressor efficiency. However, for the transonic compressor, synthetic jet on the suction surface obstructs the radial migration vortex that reaches the tip to the exit, but cause it to gather in the tip channel, resulting in the blockage and reduction of the stability margin of the compressor. In order to take into account the stability margin of the compressor, the coupled flow control is carried out by combining the casing treatment with synthetic jet on the suction surface. The results show that the flow margin of the compressor is increased by 8.76%, the total pressure ratio is increased by 1.76%, and the efficiency is only decreased by 0.13%. In coupled flow control, the suction and injection effects of the casing treatment can make up for the negative influence of synthetic jet on the tip flow, effectively improve the tip flow and expand the stable working range of the compressor. Compared with flow control that only carries out casing treatment, coupled flow control can exert the advantages of synthetic jet suppressing suction surface separation, reduce shock loss, outlet loss and casing treatment loss, and make up for the shortage of excessive efficiency reduction after casing treatment, which is the main reason for the improvement of compressor performance.

Numerical Investigation of Three-dimensional Separation Control on a High-speed Compressor Stator Vane with Tailored Synthetic Jet

Active Flow Control on A Highly Loaded Compressor Stator Cascade with Synthetic Jets

Flow Separation Control on a Highly Loaded Compressor Cascade Using Endwall Synthetic Jets

Effects of Actuation Parameters on Flow Separation Control in Compressor with Synthetic Jets

Numerical Investigation on Effectiveness of Flow Separation Control in Two-Dimensional High-Load Compressor Cascade by Synthetic Jet

Numerical simulation of secondary flow control on high-speed compressor cascade with synthetic jets

Control of Unsteady Separated Flows Inside Axial Compressors by Synthetic Jets

Numerical Study on End Wall Synthetic Jet to Improve Performance and Stability Margin of a High-speed Subsonic Axial Compressor Rotor

Numerical Investigation of Active Flow Control Using Tip Synthetic Jet on the Performance of a High-Speed Axial Compressor Rotor

Numerical Investigation of Active Flow Control of Blade Synthetic Jet on Performance and Stability of Transonic Axial Compressor Rotor

Numerical Investigation of a Sweeping Jet Actuator for Active Flow Control in a Compressor Cascade

Numerical Investigation of Stator Suction-Type Self-Circulating Casing Treatment Effects on the Aerodynamic Performance of a Single-Stage Axial Flow Compressor

Numerical investigation of the influence of suction surface synthetic jet on the performance of transonic axial flow compressor

Numerical Investigation on Corner Separation Control in a Linear Compressor Cascade by Synthetic Jet

Separation Control Using Synthetic Vortex Generator Jets in Axial Compressor Cascade

Flow Control of Annular Compressor Cascade by Synthetic Jets

Active Flow Control by Means of Endwall Synthetic Jet on a High-Speed Compressor Stator Cascade

Influence of Active Flow Control of Synthetic Jet at Suction Surface on the Performance of a Subsonic Axial Compressor Rotor

Experimental Study and Vortex Analysis in A Linear Compressor Cascade with Active Flow Control

Investigation of Flow Characteristic in a Highly-Loaded Compressor Cascade with Synthetic Jet

Separation flow control and engineering application of synthetic jets in compressor