Investigation of Control Effects of End-Wall Self-Adaptive Jet on Three-Dimensional Corner Separation of a Highly Loaded Compressor Cascade
Hejian Wang,Bo Liu,Xiaochen Mao,Botao Zhang,Zonghao Yang
DOI: https://doi.org/10.1016/j.cja.2024.04.009
IF: 5.7
2024-01-01
Chinese Journal of Aeronautics
Abstract:To overcome the limitations posed by three-dimensional corner separation, this paper proposes a novel flow control technology known as passive End-Wall (EW) self-adaptive jet. Two single EW slotted schemes (EWS1 and EWS2), alongside a combined (COM) scheme featuring double EW slots, were investigated. The results reveal that the EW slot, driven by pressure differentials between the pressure and suction sides, can generate an adaptive jet with escalating velocity as the operational load increases. This high-speed jet effectively re-excites the local low-energy fluid, thereby mitigating the corner separation. Notably, the EWS1 slot, positioned near the blade leading edge, exhibits relatively low jet velocities at negative incidence angles, causing jet separation and exacerbating the corner separation. Besides, the EWS2 slot is close to the blade trailing edge, resulting in massive low-energy fluid accumulating and separating before the slot outlet at positive incidence angles. In contrast, the COM scheme emerges as the most effective solution for comprehensive corner separation control. It can significantly reduce the total pressure loss and improve the static pressure coefficient for the ORI blade at 0°-4° incidence angles, while causing minimal negative impact on the aerodynamic performance at negative incidence angles. Therefore, the corner stall is delayed, and the available incidence angle range is broadened from −10°-−2° to −10°-4°.This holds substantial promise for advancing the aerodynamic performance, operational stability, and load capacity of future highly loaded compressors.