Abstract:A solid oxide fuel cell (SOFC) is a clean and high-efficiency energy conversion device, which undergoes improvement of performance continuously. The transport of gas species and charges proceed in the porous electrodes. The porous electrodes are also responsible for the removal of exhaust gases. In this paper, a fully coupled 3D single-channel multiphysics computational fluid dynamics (CFD) model was developed based on the finite element method (FEM). The governing equations for momentum, species, charges, and heat transport were solved by a segregated solver. The impact of decreased ionic, electronic, and pore phase tortuosity on the SOFC performance such as fuel utilization, current density, activation overpotential and temperature distribution are analyzed and compared with the base case. In addition to the tortuosity investigation, the volume fraction of the electronic phase in the active layer and the support layer is also investigated using a parametric sweep study. Of all the decreased tortuosity cases, there is an increase in ionic current density and temperature compared with the base case. Except for a decreased pore tortuosity, all other cases led to an increase of electronic current density compared with the base case. The consumption of hydrogen increased for all cases compared with the base case. The activation overpotential increased with decreased electronic phase and pore phase tortuosity, while a decrease of ionic phase tortuosity caused a decrease. Finally, when decreasing all phase tortuosity, both current density, temperature, activation overpotential, and hydrogen consumption increased. For the parametric sweep, there is an optimum electronic phase volume fraction value. This work allows for a better understanding of the relationship between the microstructure and performance of SOFCs. Meanwhile, it provides theoretical guidance for a better porous electrode design.

Geometric Design of Anode-Supported Micro-Tubular Solid Oxide Fuel Cells by Multiphysics Simulations

Numerical Modeling and Current Collection Designs for Flat-Chip Solid Oxide Fuel Cell

Numerical Simulation and Optimization of Operating and Structural Parameters for Solid Oxide Fuel Cell

Experimental Study on High-Efficiency Microtubular Solid Oxide Fuel Cell Stacks Using Various Fuels

Theoretical Studies on the Electrochemical and Mechanical Properties and Microstructure Optimization of Micro-Tubular Solid Oxide Fuel Cells

Effect of Cathode Fabrication Method on Characteristics of Anode-Supported Tubular Solid Oxide Fuel Cells

Effects of Radial and Circumferential Flows on Power Density Improvements of Tubular Solid Oxide Fuel Cells

Effects of Electrode Composition on the Electrochemical Performance and Mechanical Property of Micro-Tubular Solid Oxide Fuel Cell

Numerical multi-physical optimization of operating condition and current collecting setup for large-area solid oxide fuel cells

Numerical study of a bamboo-like micro-tubular solid oxide fuel cell

Optimization of Cathode Structure for Anode Supported Planar Solid Oxide Fuel Cell

Multi-Physics Modeling Assisted Design of Non-Coking Anode for Planar Solid Oxide Fuel Cell Fueled by Low Steam Methane

Novel light-weight, high-performance anode-supported microtubular solid oxide fuel cells with an active anode functional layer

Research Progress of Anode-Supported Micro-Tubular Solid Oxide Fuel Cells

Numerical Study on Effects of Structure Parameters and Operating Conditions on the Micro-Tubular SOFC Stack Performance

Fabrication and Characterization of High Performance Intermediate Temperature Micro-Tubular Solid Oxide Fuel Cells

High Performance Tubular Solid Oxide Fuel Cells With Bscf Cathode

Optimization Of Distributed Cylindrical Interconnect Ribs For Anode- And Cathode-Supported Solid Oxide Fuel Cell

Optimizing Bilayer Electrolyte Thickness Ratios for High-Performing Low-Temperature Solid Oxide Fuel Cells

Parametric Study for Electrode Microstructure Influence on SOFC Performance

High performance electrolyte-coated anodes for low-temperature solid oxide fuel cells: Model and Experiments