Abstract:The phenomenon of fretting fatigue damage is related to tribological behaviour and commonly occurs at the contact interface between two bodies that sustain oscillation loads. Based on the complicated mechanical situation, several methods have been developed to predict the crack initiation location and life. The Continuum Damage Mechanics (CDM) approach in conjunction with Finite Element Method (FEM) is used in this paper. The fretting fatigue lifetime includes two parts, crack initiation lifetime and crack propagation lifetime, and this paper focuses on the phase of crack initiation. Homogeneous materials are usually studied in fretting fatigue problems, and the influence of defects is necessary to be considered. In this study, the authors proposed several models to consider the effect of heterogeneity on crack initiation point and crack initiation lifetime and the numerical model is a 2D one with plane strain assumption. To get more accurate numerical results with low computational cost, a Two-Scale Analysis approach is developed in this paper. Two macroscopic models and three microscopic models are proposed, including a Macroscopic homogeneous model (Macro-HOMO), a Multiscale Homogenization model with Direct Numerical Simulation (MH-DNS), a Microscopic homogeneous model (Micro-HOMO), a Microscopic Model with equivalent material properties by using Mean Field Homogenization method (Micro-MFH), and a microscopic model with Direct Numerical Simulation (Micro-DNS). The results obtained by using the CDM approach with different microscopic models are compared, which shows that the prediction accuracy of the Micro-DNS is the best. In addition, in terms of computational cost, the Micro-DNS model shows great advantages as well comparing to the Macro-DNS model.

A Novel Two-Scale Damage Model for Fatigue Damage Analysis of Transition Region Between High- and Low-Cycle Fatigue

Anisotropic Damage Model under Continuum Slip Crystal Plasticity Theory for Single Crystals

A Multi-Scale Damage Model for Fatigue Accumulation Due to Short Cracks Nucleation and Growth

A New Continuum Damage Mechanics–based Two‐scale Model for High‐cycle Fatigue Life Prediction Considering the Two‐segment Characteristic in S‐N Curves

A Continuum Damage Model for Multi-Axial Low Cycle Fatigue of Porous Sintered Metals Based on the Critical Plane Concept

A Discrete Element Model for Damage and Fatigue Crack Growth of Quasi-Brittle Materials

A Model of Continuum Damage Mechanics for High Cycle Fatigue of Metallic Materials

Bi-variable Damage Model for Fatigue Life Prediction of Metal Components

A Continuum Damage Mechanics Approach for Fatigue Life Prediction of Open-Hole Metallic Plate

A novel two-scale nonlinear damage accumulation model for vibration fatigue life prediction

An Anisotropic Continuum Damage Model for High-Cycle Fatigue

A MODIFIED LOW CYCLE FATIGUE DAMAGE MODEL FOR METALS

Multi-Scale Model for Linking Collective Behavior of Short and Long Cracks to Continuous Average Fatigue Damage

A Two-Level Non-Intrusive Coupling Method for Fatigue Analysis

Two-Scale Analysis of Fretting Fatigue crack initiation in heterogeneous materials using Continuum Damage Mechanics Approach

Accumulated crystal plasticity dissipation energy driven continuum damage two-scale model for fretting fatigue initiation life

A study on fatigue damage accumulation based on continuum damage mechanics

Physical description and model validation of welded joint fatigue damage evolution

A New Fatigue Damage Accumulation Model Based on Nonlinear Continuum Damage Mechanics

Isodamage Curve-Based Fatigue Damage Accumulation Model Considering the Exhaustion of Static Toughness

Enhanced CDM model accounting of stress triaxiality and Lode angle for ductile damage prediction in metal forming