Abstract:The phenomenon of fretting fatigue damage is related to tribological behaviour and commonly occurs at the contact interface between two bodies that sustain oscillation loads. Based on the complicated mechanical situation, several methods have been developed to predict the crack initiation location and life. The Continuum Damage Mechanics (CDM) approach in conjunction with Finite Element Method (FEM) is used in this paper. The fretting fatigue lifetime includes two parts, crack initiation lifetime and crack propagation lifetime, and this paper focuses on the phase of crack initiation. Homogeneous materials are usually studied in fretting fatigue problems, and the influence of defects is necessary to be considered. In this study, the authors proposed several models to consider the effect of heterogeneity on crack initiation point and crack initiation lifetime and the numerical model is a 2D one with plane strain assumption. To get more accurate numerical results with low computational cost, a Two-Scale Analysis approach is developed in this paper. Two macroscopic models and three microscopic models are proposed, including a Macroscopic homogeneous model (Macro-HOMO), a Multiscale Homogenization model with Direct Numerical Simulation (MH-DNS), a Microscopic homogeneous model (Micro-HOMO), a Microscopic Model with equivalent material properties by using Mean Field Homogenization method (Micro-MFH), and a microscopic model with Direct Numerical Simulation (Micro-DNS). The results obtained by using the CDM approach with different microscopic models are compared, which shows that the prediction accuracy of the Micro-DNS is the best. In addition, in terms of computational cost, the Micro-DNS model shows great advantages as well comparing to the Macro-DNS model.

A Multi-Scale Damage Model for Fatigue Accumulation Due to Short Cracks Nucleation and Growth

A Model for Ultra Low Cycle Fatigue Damage Prediction of Structural Steel

Improved Ultra-Low Cycle Fatigue Fracture Models for Structural Steels Considering the Dependence of Cyclic Damage Degradation Parameters on Stress Triaxiality

Mechanistic Modeling of Fatigue Crack Growth in Asphalt Fine Aggregate Matrix under Torsional Shear Cyclic Load

A Kinetics-Based Model of Fatigue Crack Growth Rate in Bituminous Material

A novel two-scale nonlinear damage accumulation model for vibration fatigue life prediction

Accumulated crystal plasticity dissipation energy driven continuum damage two-scale model for fretting fatigue initiation life

Damage Evolution Model Considering Fatigue Failure Factor Under Multiaxial Non-Proportional Loading

Investigation of the heat energy and multi‐level load on subsurface fatigue damage evolution via multi‐scale method

Two-Scale Analysis of Fretting Fatigue crack initiation in heterogeneous materials using Continuum Damage Mechanics Approach

A unified stochastic damage model for concrete under monotonic and fatigue loading

Life Prediction of Corrosion-Fatigue Based on a New Crack Growth Rate Model with Damage and the Extended Finite Element Method

A Continuum Damage Model for Multi-Axial Low Cycle Fatigue of Porous Sintered Metals Based on the Critical Plane Concept

An engineering model of fatigue crack growth under variable amplitude loading

Structural mechanics model for anisotropic damage and fatigue life prediction method of face-centered cubic metal materials

Physical description and model validation of welded joint fatigue damage evolution

Prediction of Low Cycle Fatigue Crack Growth under Mixed-mode Loading Conditions Using Cohesive Zone Models

A continuum damage model for prediction of crack initiation life of pitting corrosion and fatigue

Probabilistic damage tolerance assessment method based on the multi-scale crack growth model

An Elasto-Plastic Damage Accumulation Model for Fatigue Life Predication of Ductile Metals at the Yield Stress

Application of a Cohesive Zone Model for Simulating Fatigue Crack Growth from Moderate to High <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" id="M1"><mml:mi mathvariant="normal">Δ</mml:mi><mml:mi>K</mml:mi></mml:math> Levels of Inconel 718