Abstract:The mechanical anisotropic properties of aluminum alloy are studied using multi-level approaches for strain-rate and temperature-sensitive large plastic deformation of polycrystalline aggregates. Unlike previous researches, the thermal effect and the damage evolution process are considered simultaneously and integrated in the CPFEM method. In the microscopic constitutive equation of crystal plasticity, the shear strain rate on the slip system is described by an advanced exponential function based on thermal activated mechanism, instead of traditional phenomenological power-law function. To determine the rate-sensitive material parameters in this new model, the strain rate and temperature jump tests are performed. In addition, a simulation of one representative volume element is compared to the results of conventional tensile tests to obtain other thermal parameters. Coupled with the continuum damage evolution formula, this thermal affected crystal plasticity model is then implemented in a single crystal analysis for different orientation, temperature and strain rate conditions. Finally, this extended crystal plasticity model is applied in the finite element method to simulate the mechanical properties of 5052 aluminum alloy at absolute temperature 473 K. Taylor model is also used to compare these simulations as well as the experimental data. The results show that the damage model coupled in the crystal plasticity is able to predict the mechanical response of 5052 aluminum alloy; moreover, this model can simulate the explicit evolution of damage factor and local stress concentration in the deformation of standard tensile test specimen. In the simulation, the specimen is meshed by rectangular elements and each element is given an initial orientation at the first time increment step. This study argues that even in high temperature, the orientation mismatch between adjacent grains could lead to early cavity or crack initiation and the damage development is similar to the void evolution theory. An explanation of the possible fracture angle is given in the thermal tensile test due to polycrystalline anisotropy. At last, the analysis of stress heterogeneity and texture evolution is also shown in this study.

Anisotropic Damage Model under Continuum Slip Crystal Plasticity Theory for Single Crystals

Coupling Crystal Plasticity and Continuum Damage Mechanics for Creep Assessment in Cr-based Power-Plant Steel

On Analysis of the Elasto‐viscoplastic Response of Single Crystals with Anisotropic Damage: Constitutive Modelling and Computational Aspects

Creep Properties and Life Model of Anisotropic Ni-based Single Crystal Superalloys over a Wide Temperature Range

A Damage-Effect-involved Phenomenological Crystal Plasticity Model and Computational Methods for Mechanical Responses of FeCrAl Alloys

Thermodynamic Formulation of a Unified Multi-Mechanism Continuum Viscoplastic Damage Model with Application to High-Cr Steels

A Crystal Plasticity Model of Low Cycle Fatigue Damage Considering Dislocation Density, Stress Triaxiality and Lode Parameter

A Modified Microstructure-Based Creep Damage Model for Considering Prior Low Cycle Fatigue Damage Effects

Crystal plasticity extended models based on thermal mechanism and damage functions: Application to multiscale modeling of aluminum alloy tensile behavior

Heterogeneous Deformation and Damage Mechanisms in Multi-Phase TA15 Ti-alloy: Insights from Experiments Informed Damage-Crystal Plasticity Modelling

High Cycle Fatigue Life Prediction Model Based on Crystal Plasticity and Continuum Damage Mechanics for Ni-based Single Crystal Superalloys under a Multiaxial Stress State

A Continuum Damage Mechanics-Based Viscoplastic Model of Adapted Complexity for High-Temperature Creep–Fatigue Loading

Constitutive modeling and failure mechanisms of anisotropic tensile and creep behaviors of nickel-base directionally solidified superalloy

A crystal plasticity-based microdamage model and its application on the tensile failure process analysis of 7075 aluminum alloy

A Crystal Plasticity-Based Creep Model Considering the Concurrent Evolution of Point Defect, Dislocation, Grain Boundary, and Void

Modeling of Anisotropic Damage and Creep Deformation in Brittle Rocks

Modelling of dynamic behaviour of orthotropic metals including damage and failure

Enhanced CDM model accounting of stress triaxiality and Lode angle for ductile damage prediction in metal forming

A Thermal Damage-Coupled Constitutive Model for Predicting Fracture and Microstructure Evolution and Its Application in the Hot Spinnability Process

A modified damage-coupled viscoplastic constitutive model for capturing the asymmetric behavior of a nickel-based superalloy under wide creep-fatigue loadings

An Anisotropic Continuum Damage Model for High-Cycle Fatigue