Abstract:Relevance. Vacuum-plasma methods of applying functional coatings are widely used to increase the reliability and durability of machine and mechanism parts, cutting tools, and technological equipment, as well as in modern micro- and nanoelectronics for applying conductive and dielectric layers of various thicknesses. The study presents a method of thermionic coating that combines in one technological cycle the processes of surface cleaning by a stream of low-energy ions and plasma electron beam evaporation of a substance under conditions of thermionic plasma formation. Aim. The research aims to determine the possibility of using the presented methodology to create and process functional coatings without radiation damage to the substrate surface. Methodology. The experimental studies were carried out in a plasma electron beam system with a primary plasma source based on an arc discharge with a filament cathode. The samples were diagnosed using a scanning electron microscope. Results. The ion current density from the primary plasma was investigated to determine the efficiency of the surface cleaning mechanism by ion bombardment. The dependences of the ionic current density on the initial parameters of the experiment were determined. The results of the treatment of the (TiZr/TiSi) N sample surface with a plasma ion stream are presented. The obtained scanning electron microscope images showed that such treatment leads to the cleaning of the surface layer from various contaminants without damage and creates a substrate for further thermionic deposition of a coating with a high degree of adhesion. The mechanism of thermionic deposition of a titanium monolayer on a stainless-steel substrate previously cleaned by ion bombardment was studied. The revealed order of magnitude higher values of the ionic current to the substrate during the formation of thermionic plasma indicate a significant increase in the rate of the deposition process and contribute to the formation of a high-quality ion-plasma coating. Conclusions. The scanning electron microscope images of the sample surface showed that the titanium coating during thermionic deposition was uniformly distributed over the substrate surface, without any droplet phase, which indicates the suitability of this technique for applying functional coatings without radiation damage to the substrate surface

A Cost- and Time-Saving Strategy of Spraying TiO 2 Self-Cleaning Coatings in Tubular Substrates by Air Cold Plasma

Ultrafast Spray of Tio<inf>2</inf> Self-Cleaning Films in Tubular Substrates

Conformally Anodizing Hierarchical Structure in a Deformed Tube Towards Energy-Saving Liquid Transportation

Preparation, characterization, and photocatalytic performance of atmospheric plasma-sprayed TiO2/Al2O3 coatings on glass substrates

Oxidation Control of Atmospheric Plasma Sprayed FeAl Intermetallic Coatings Using Dry-Ice Blasting

Novel Effective Photocatalytic Self-Cleaning Coatings: TiO2-Polyfluoroalkoxy Coatings Prepared by Suspension Plasma Spraying

D. C. Plasma-Sprayed Coatings of Nanostructured Alumina-Titania-Silica

Photocatalytic performance and microstructure of thermal-sprayed nanostructured TiO2 coatings

Effect of Plasma Treatment on Self-Cleaning Features of Acrylic Paint/TiO2-Coated Surfaces for Environmental Pollutant Removal

Surface Engineering for an Enhanced Photoelectrochemical Response of TiO2 Nanotube Arrays by Simple Surface Air Plasma Treatment.

Preparation of Photo-Catalysis TiO_2 Films by Combined Plasma Surface Treatment

Proposition of a robot-based free diamond abrasive grinding process and its influence on the characteristics of plasma-sprayed 8YSZ coatings

Solution plasma engineering the surface of nitrogen doped TiO 2 for photothermal catalysis

Deposition of Thin Titania Films by Dielectric Barrier Discharge

Investigation of electrode-driven hydrogen plasma method for in situ cleaning of tin-based contamination

Novel Strategy for Developing Bulk-Like Dense Metallic Coatings by Plasma Spraying

Supersonic Cold Spraying for Energy and Environmental Applications: One‐Step Scalable Coating Technology for Advanced Micro‐ and Nanotextured Materials

Using optical emission spectroscopy in atmospheric conditions to track the inflight reduction of plasma sprayed TiO2−x feedstock for thermoelectric applications

Very low-pressure plasma-sprayed dense yttria-stabilized zirconia coatings using an axial bi-cathode plasma torch

Thermionic coating method with preliminary bombardment of the substrate surface with a stream of low energy ions

Fabrication of TiO2-SrCO3 Composite Coatings by Suspension Plasma Spraying: Microstructure and Enhanced Visible Light Photocatalytic Performances