Abstract:Membrane separation technology often suffers from fouling during operation and undergoes a trade-off effect between permeability and selectivity. We report a new strategy for fabricating antifouling poly(vinylidene fluoride) (PVDF) ultrafiltration membrane by incorporating hydrophilic, positive-charge tuned quaternized chitosan magnetic particles (QCMP). Fe 3 O 4 -chitosan particles were synthesized by co-precipitation and cross-linked by glutaraldehyde, and further quaternization modification was applied to obtain a series of QCMP with different charge densities. Then, the QCMP were incorporated into the matrix of PVDF to prepare hybrid membrane via the non-solvent-induced phase separation method. The effect of incorporated QCMP on the membrane morphology and properties was determined using scanning electron microscopy, water contact angle, surface free energy, membrane pore size and porosity. The incorporation of QCMP into the PVDF membrane effectively increased the surface hydrophilicity. Results of bovine serum albumin (BSA) solution filtration showed a higher flux recovery ratio (FRR) and a lower total fouling ratio(R t ) of the QCMP/PVDF hybrid membranes than those of the PVDF pristine membrane, indicating the addition of QCMP was helpful to enhance antifouing performance for BSA via improving hydrophilicity and neutralizing the surfaces of negatively charged PVDF membranes. Furthermore, the permeability flux of BSA was increased by 53 % and the rejection rate was also increased by 26 %, indicating the hybrid membranes have the potential to break the permeability-selectivity trade-off. Therefore, this study provided a green, simple and effective method for the rational design and construction membranes with enhanced the permeability and selectivity as well as antifouling performance.

Preparation of Positively Charged PVDF Membranes with Improved Antibacterial Activity by Blending Modification: Effect of Change in Membrane Surface Material Properties

Antifouling and Antibacterial Behavior of Membranes Containing Quaternary Ammonium and Zwitterionic Polymers

Improved Antifouling Properties of Polyvinyl Chloride Blend Membranes by Novel Phosphate Based-Zwitterionic Polymer Additive

Improving Hydrophilicity And Protein Resistance Of Poly(Vinylidene Fluoride) Membranes By Blending With Amphiphilic Hyperbranched-Star Polymer

Polyvinylidene Fluoride Membrane Blended with Quaternary Ammonium Compound for Enhancing Anti-Biofouling Properties: Effects of Dosage

Rapid and Robust Modification of PVDF Ultrafiltration Membranes with Enhanced Permselectivity, Antifouling and Antibacterial Performance

Surface Modification of Polyvinylidene Fluoride Membrane by Atom-Transfer Radical-Polymerization of Quaternary Ammonium Compound for Mitigating Biofouling

Surface Modification of Poly(vinylidene fluoride) Ultrafiltration Membranes with Chitosan for Anti-Fouling and Antibacterial Performance

Modification of Polyvinylidene Fluoride Membrane by Quaternary Ammonium Compounds Loaded on Silica Nanopollens for Mitigating Biofouling

Antifouling and Antibacterial Improvement of Surface-Functionalized Poly(vinylidene Fluoride) Membrane Prepared Via Dihydroxyphenylalanine-Initiated Atom Transfer Radical Graft Polymerizations

Molecular design of antifouling ultrafiltration membranes via copolymerization of bactericidal and hydrophilic polymers

Preparation of a PVDF hollow fiber blend membrane via thermally induced phase separation (TIPS) method using new synthesized zwitterionic copolymer

A New Synthetical Process of PVDF Derivatives Via Atom Transfer Radical Graft Polymerizations and Its Application in Fabrication of Antifouling and Antibacterial PVDF Ultrafiltration Membranes

Membrane Surface with Antibacterial Property by Grafting Polycation

Poly(Vinylidene Fluoride)-Graft-Poly (N-Vinyl-2-pyrrolidone) Copolymers Prepared Via A Raft-Mediated Process and Their Use in Antifouling and Antibacterial Membranes

Antibacterial Activities of Surface Modified Electrospun Poly(vinylidene Fluoride-Co-hexafluoropropylene) (PVDF-HFP) Fibrous Membranes

Enhancing the Antibacterial Properties of PVDF Membrane by Hydrophilic Surface Modification Using Titanium Dioxide and Silver Nanoparticles

Surface Modification of Polymeric Films and Membranes to Achieve Antibacterial Properties

Antifouling modification of PVDF membranes via incorporating positive-charge tuned quaternized chitosan magnetic particles

Fabrication and Characterization of Polyvinylidene Fluoride/zinc Oxide Membranes with Antibacterial Property

Preparation of Enduringly Antifouling Pvdf Membrane with Compatible Zwitterionic Copolymer Via Thermally Induced Phase Separation