Abstract:Polyvinylidene fluoride (PVDF)-perfluorosulphonic acid (PFSA) hollow fibre ultrafiltration (UF) blend membranes were prepared by wet-spinning method. Polyvinylpyrrolidone (PVP) and ethanol aqueous solutions were employed as additive and coagulants, respectively. The effect of PVP concentration in the dopes and ethanol concentration in the coagulants on morphology and performance of PVDF-PFSA hollow fibre UF blend membranes were investigated. Blend membranes were characterized in terms of precipitation kinetics, morphology, thermal property and separation performance. The results showed that the increments of PVP concentration in the dopes and ethanol concentration in coagulants both resulted in higher pure water permeation flux (PWP) and worse rejection (R) of bovine serum albumin (with the increment of PVP concentration from 0 to 5 wt% in the dopes, PWP increased from 41.7 L.m(-2).h(-1) to 134 L.m(-2).h(-1) and R decreased from 99.8% to 84.4% as well as with the increase in ethanol concentration in coagulants from 0 to 40 wt% PWP increased from 33.5 L.m(-2).h(-1) to 123 L.m(-2).h(-1) and R decreased from 97.7% to 88.7%). However, the proportion of sponge-like structure in the cross-section of membranes decreased with the increasing PVP concentration in the dopes and the proportion increased with the increased ethanol concentration in the coagulations. In addition, the location of the sponge-like structure in the cross-section of membranes was significantly influenced by ethanol concentrations in the coagulants and DSC results revealed that the crystallinity (X-c) of the blend membrane was in accordance with the proportion of sponge-like structure. These behaviours were attributed to the different roles of PVP in the dopes and ethanol in the coagulants, respectively. PVDF-PFSA hollow fibre membranes with different morphologies and performances were prepared by these two different routes. Meanwhile, the range of PVDF-PFSA hollow fibre blend membranes was extended.

Modification of Polyvinylidene Fluoride (PVDF) Membrane by Polymer Blending with Phase Inversion Method

Modification of Porous Poly(Vinylidene Fluoride) Membrane Using Amphiphilic Polymers with Different Structures in Phase Inversion Process

Improving Hydrophilicity And Protein Resistance Of Poly(Vinylidene Fluoride) Membranes By Blending With Amphiphilic Hyperbranched-Star Polymer

Influence of additives on phase separation process of PVDF solution and membrane morphology

Fabrication of Hydrophilic and Sponge-Like PVDF/brush-like Copolymer Blend Membranes Using Triethylphosphate As Solvent

Preparation and Characterization of Poly(vinylidene Fluoride) Flat Sheet Membrane with Tg Tunable Amphiphilic Terpolymer As Membrane Additive

Improved Antifouling Properties of Polyvinyl Chloride Blend Membranes by Novel Phosphate Based-Zwitterionic Polymer Additive

Effect of Additives on the Morphology and Performance of Symmetric Network PVDF Membranes

Improved Hydrodynamic Permeability and Antifouling Properties of Poly(vinylidene Fluoride) Membranes Using Polydopamine Nanoparticles As Additives

Influence of Dope Viscosity on the Fabrication of Pvdf Hollow Fiber Membranes with Single Skin Layer

Membranes of poly (vinyl butyral) (PVB) or cationic PVB (CPVB) blended with poly (vinylidene fluoride) (PVDF) prepared by a nonsolvent induced phase separation method: Miscibility and hydrophilicity

PVDF blended PVDF-g-PMAA pH-responsive membrane: Effect of additives and solvents on membrane properties and performance

Effect of Different Additives on Morphology and Properties of Poly(Vinylidene Fluoride) Membrane

Surface Modification of Poly(vinylidene fluoride) Ultrafiltration Membranes with Chitosan for Anti-Fouling and Antibacterial Performance

Poly(vinylidene Difluoride)/poly(tetrafluoroethylene-Co-vinylpyrrolidone) Blend Membranes with Antifouling Properties.

Effect of Additives in the Casting Solutions on the Morphology and Performance of Pvdf Membranes

Preparation and Characterization of a Novel Poly(vinylidene fluoride-co-hexafluoropropylene)/Poly(ethersulfone) Blend Membrane Fabricated Using an Innovative Method of Mixing Electrospinning and Phase Inversion

Surface Modification of Poly(Vinylidene Fluoride) Membrane with Hydrophilic and Anti-Fouling Performance Via A Two-Step Polymerization

Morphology and Performance of Polyvinylidene Fluoride/Perfluorosulphonic Acid Hollow Fibre Ultrafiltration Blend Membranes

Highly Effective Anti-Organic Fouling Performance of a Modified PVDF Membrane Using a Triple-Component Copolymer of P(Stx-co-MAAy)-g-fPEGz as the Additive

Effects of Pore-Forming Additives on Structures and Properties of Pvdf/Fe3+/Cu2+ Hollow Fiber Membranes