Abstract:Nowadays, due to the growing demands of data centers, the traditional line frequency transformer based data center power distribution system (DC-PDS) is becoming bulky and inefficient. Although SST-based DC-PDS dramatically improves the system efficiency, the traditional multicell SST with input-series output-parallel architectures has limitations. Using high-voltage devices to develop single-cell SST improves system performance, however, its application is limited by high-voltage power devices. As an alternative solution, achieving high blocking voltage through the series connection of low-voltage devices brings several advantages. Nevertheless, the series connection brings about two main problems, namely the voltage imbalance among devices and the increment of switching loss. This article proposes a medium voltage series resonant converter (MVSRC) with series-connected SiC MOSFETs. By adding snubber capacitor to each SiC MOSFET and working at LLC resonant soft-switching mode, the voltage imbalance is reduced and switching loss is decreased. Due to snubber capacitors, there are differences between MVSRC and traditional LLC converter, hence the analytical model of MVSRC is established. Moreover, the voltage imbalance model is established and the voltage imbalance sensitivity is defined to guide the snubber parameter selections. Then, a design example of the 99% efficient 5-kV/400-V prototype is presented. Last, the experimental results show that the voltage imbalance is reduced effectively and the switching loss is decreased dramatically, verifying the validity of proposed methods and the accuracy of analysis.

Research on a 4000-V-ultrahigh-input-switched-mode Power Supply Using Series-Connected MOSFETs

A Soft-switching Universal-input Solid State Transformer

Zero-Voltage-Switching SiC-MOSFET Three-Phase Four-Wire Back-to-Back Converter

A Novel ZVS High Voltage Power Supply for Micro-Channel Plate Photomultiplier Tubes

A New ZVCS Resonant Voltage-Fed Push-Pull Converter for Vehicle Inverter Application

Hybrid SiC-Si DC–AC Topology: SHEPWM Si-IGBT Master Unit Handling High Power Integrated with Partial-Power SiC-MOSFET Slave Unit Improving Performance

Analysis and Flexible DV/DT Control of an Active Clamping Topology for Series-Connected SiC MOSFETs

A Novel Gate Control Strategy for 3.4kv Cascade Sic Mosfets Stack

A Compact Gate Control and Voltage-Balancing Circuit for Series-Connected SiC MOSFETs and Its Application in a DC Breaker

Voltage Balancing Method for Series-Connected SiC MOSFETs under No Load Condition

High input voltage single-stage flyback AC/DC LED driver using series-connected MOSFETs

Medium Voltage Soft-Switching DC/DC Converter with Series-Connected SiC MOSFETs

A High Input Voltage Auxiliary Power Supply Utilizing Automatic Balanced MOSFET Stack

1000V wide input auxiliary power supply design with 1700V Silicon Carbide (SiC) MOSFET for three-phase applications

High-Density Current-Transformer-Based Gate-Drive Power Supply With Reinforced Isolation for 10-kV SiC MOSFET Modules

A High-Voltage Pulse Modulator Composed of SiC MOSFETs/IGBTs in a Hybrid Connecting State

A 1200 V/200 A Half-Bridge Power Module Based on Si IGBT/SiC MOSFET Hybrid Switch

Hybrid Dynamic Voltage Balancing Technique for Series-Connected SiC MOSFETs

A novel high‐voltage solid‐state switch based on the SiC MOSFET series and its overcurrent protection

A Programmable Gate Driver Module-Based Multistage Voltage Regulation SiC MOSFET Switching Strategy

Common-Mode EMI Mathematical Modeling Based on Inductive Coupling Theory in a Power Module With Parallel-Connected SiC MOSFETs