Abstract:Enhancement-mode (E-mode) GaN MOS-HEMTs using recess process typically face the challenge of precise thickness control, surface roughness issue, and interface traps, all of which could lead to the degradation of the device performance and cause reliability issues. In this article, we use a combined process of atomic layer etching (ALE) technique and atomic layer deposited (ALD) HfSiO dielectric. ALE is repeated oxidation and dry etching process with minimal surface damage, leading to a precisely controlled low-damage recess channel area. The fabricated AlGaN/GaN MOS-HEMTs exhibit E-mode operation with a positive threshold voltage (V-th) of +2.1 V with small V-th dispersion for different devices, an ultrahigh drain current ON-OFF ratio over 1010 and a low ON-resistance (R-ON) of 11.5 Omega . mm at gate-to-drain length (L-GD) of 25 mu m. Source field plate (SFP) structure is employed to reduce the charge trapping process and improve the reliability at high voltages. The current collapse of the E-mode device with SFP structure can be effectively suppressed due to the optimized redistribution of the peak electric field in the gate-to-drain access region, where a significantly improved dynamic R-ON of only 1.17 times increase from the static R-ON after OFF-state V-DS stress of 600 V. Moreover, the enhanced vertical electric field with decreased AlGaN barrier thickness and the positive shift in threshold voltage for the E-mode device can effectively suppress the current collapse, which outperforms the depletion-mode counterpart. The breakdown voltage reaches a considerable value of 1560 V at an OFF-state current density of 1 mu A/mm.

Breakdown Enhancement and Current Collapse Suppression by High-Resistivity GaN Cap Layer in Normally-Off AlGaN/GaN HEMTs

Breakdown Voltage Enhancement and Specific On-Resistance Reduction in Depletion-Mode GaN HEMTs by Co-Modulating Electric Field

Current collapse suppression in AlGaInN/GaN HEMTs with thin unintentionally doped GaN channel and AlN back barrier grown on single-crystal AlN substrate

High-current-density high-voltage normally-off AlGaN/GaN hybrid-gate HEMT with low on-resistance

Breakdown voltage improvement of enhancement mode AlGaN/GaN HEMT by a novel step-etched GaN buffer structure

Improved Current Collapse in Recessed AlGaN/GaN MOS-HEMTs by Interface and Structure Engineering

Improved breakdown voltage and dynamic R on characteristics in normally-off GaN-based HEMTs featuring fully-recessed and bilayer-dielectric gate structure

Current-collapse Suppression and Leakage-Current Decrease in AlGaN/GaN HEMT by Sputter-Tan Gate-Dielectric Layer

1.2 kV/25 A Normally off P-N Junction/AlGaN/GaN HEMTs With Nanosecond Switching Characteristics and Robust Overvoltage Capability

Simulation Design of a High-Breakdown-voltage P-Gan-gate GaN HEMT with a Hybrid AlGaN Buffer Layer for Power Electronics Applications

High Voltage Normally-Off p-GaN Gate HEMT with the Compatible High Threshold and Drain Current

Normally-off GaN HEMTs with InGaN P-Gate Cap Layer Formed by Polarization Doping

High Breakdown AlGaN/GaN MOSHEMT with Thermal Oxidized Ni/Ti As Gate Insulator

Current Collapse and High-Electric-Field Reliability of Unpassivated GaN/AlGaN/GaN HEMTs

High-performance Normally off AlGaN/GaN High Electron Mobility Transistor with P-Type H-Bn Cap Layer

Study of Current Collapse Behaviors of Dual-Gate AlGaN/GaN HEMTs on Si

Hybrid High-Power AlGaN/CdZnO/GaN/AlGaN HEMT with High Breakdown Voltage

Improving Performance and Breakdown Voltage in Normally-Off GaN Recessed Gate MIS-HEMTs Using Atomic Layer Etching and Gate Field Plate for High-Power Device Applications

High breakdown voltage AlGaN-GaN power-HEMT design and high current density switching behavior

Breakdown Voltage Enhancement For Gan High Electron Mobility Transistors

A Normally-off P-Gate AlGaN/GaN HEMT for High Power Application