Abstract:The high temperature tensile test of Ti-47.5Al-2.5 V-1.0Cr-0.2Zr alloy was carried out by electronic universal testing machine under the condition of 750–900 °C/10 −5 –10 −3 s −1 . The hot tensile stress-strain curves were analyzed, and the constitutive model under hot tensile conditions was established. The microstructure transformation rule and deformation mechanism during tensile process were determined. The results show that the hot tensile curve is longer in the steady-state flow stage corresponding to lower strain rate and higher tensile temperature, the true stress declines and the elongation at break increases. The constitutive equation was established based on the tensile curve data, and the corresponding thermal activation energy was 310.3 kJ/mol. As the rise of tensile temperature and the decline of strain rate, the proportion about cross-layer fracture in the tensile fracture morphology decreases, the number of dimples increases, more lamellar structures change into recrystallized structures, and the softening effect of the alloy is more obvious. The dislocation deformation mechanism mainly includes the existence of dislocation slip and climb, dislocation intersection and dislocation ring or dislocation network formation. Twinning deformation is also another important mechanism of high temperature tensile deformation of TiAl alloy. Twins are formed in parallel with each other, so that the deformation can be further carried out. The dislocations and twins in the deformed microstructure will provide nucleation conditions for recrystallized grains. The dynamic recrystallization(DRX) grains are preferentially formed around the grain boundary and the vicinity of dislocation and twin is also preferred nucleation site for DRX. The DRX behavior is the main softening mechanism, and DRX size and volume fraction corresponding to lower tensile rate and higher tensile temperature are larger.

Effects of Nano-Twinning on the Deformation and Mechanical Behaviours of TiAl Alloys with Distinct Microstructure at Elevated Loading Temperatures

A Molecular Dynamics Study on Mechanical Performance and Deformation Mechanisms in Nanotwinned NiCo-based Alloys with Nano-Precipitates under High Temperatures

Temperature Effects on Deformation Substructures and Mechanisms of a Ni-based Single Crystal Superalloy

Unraveling hot deformation behavior and microstructure evolution of nanolamellar TiAl/Ti3Al composites

Microstructure Evolution of Near Gamma TiAl Intermetallic under Tensile Impact Loadings at High Temperatures

Improved Fracture Toughness of Polycrystalline Γ‐tial‐based Intermetallic Alloys with a Favorable Deformation Mechanism of Twinning

Microstructural evolution and FCC twinning behavior during hot deformation of high temperature titanium alloy Ti65

Dynamic behavior and fracture mode of TiAl intermetallics with different microstructures at elevated temperatures

Nanoindentation simulation study on mechanical properties and microstructure evolution of twin γ-TiAl alloy

High-Density Deformation Nanotwin Further Improved Tensile Strength of Polycrystalline Γ-Tial-based Intermetallic Alloy

Remarkable Improvement in Tensile Strength of a Polycrystalline Γ-Tial-based Intermetallic Alloy by Deformation Nanotwins

Deformation Micro-Twinning Arising at High Temperatures in a Ni-Co-based Superalloy

Experimental Study of Ti-46.5Al-2Nb-2Cr with Three Different Microstructures under Elevated Temperatures and High Strain Rate

Microstructural characteristics and dynamic recrystallization behavior of β-γ TiAl based alloy during high temperature deformation

Microstructure evolution of a forged TiAl-Nb alloy during high-temperature tensile testing

Hot Workability and Superplasticity of Low-Al and High-Nb Containing TiAl Alloys

Multi-scale Study of Microstructure Evolution in Hot Extruded Nano-Sized TiB2 Particle Reinforced Aluminum Composites

Study on high temperature tensile constitutive behavior and deformation mechanism of Ti-47.5Al-2.5 V-1.0Cr-0.2Zr alloy

Understanding the High-Temperature Fatigue Crack Growth from Exceptional Nano-α Phases and {10$$ \bar{1} $$2} Deformation Twins in Hot Deformed Titanium Alloy

Dynamic recrystallization, phase transformation and deformation mechanisms of a novel Ti-43Al-6Nb-1Mo-1Cr alloy during the isothermal deformation

The α 2 to orthorhombic O-phase transformation-facilitated high elastically mediated strain transfer ability in high Nb-TiAl alloys