Abstract:This work focuses on the design trade-off aspects related to the structural behavior of tall buildings subjected to the actions of wind and earthquake and on the feasibility of adopting innovative low-damage structural systems and connections combining engineered wood and steel. A multi-hazard approach is developed and proposed, through the use of an efficient equivalent baseline reference to compare the structural performance under two independent whilst competing hazards. Following a capacity-vs-demand approach an Acceleration Displacement Response Spectrum (ADRS) domain, well established in the earthquake engineering environment, is suggested to be extended and adapted to wind design. The innovative procedure is developed and implemented with reference to two case study tall buildings, 18 storey and 36 storey high, respectively. The use of either traditional steel-only connections or innovative low-damage steel-timber hybrid - unbonded post-tensioned rocking-dissipative – connections are employed and compared. Two difference constructions sites are considered: 1) a high seismicity and low wind zone and 2) low seismicity and high wind zone. A Direct Displacement Based Design (DBDD) procedure is firstly implemented to design the structural system targeting the desired level of seismic performance. Then the effects of wind loading are estimated through the analytical procedure provided by the Italian National Research Council (CNR), which allows to calculate wind-induced forces and peak floor accelerations. Peak interstorey drifts are selected as seismic performance indicator, while peak floor accelerations are selected as wind performance indicator with the intent to focus on the building occupants' comfort serviceability limit state. The predicted structural performances are then numerically validated through time series/history analyses under earthquake and wind loading with a lumped plasticity global model of the case-study buildings. Finally, the structural responses under the two actions are compared within the proposed innovative common baseline ADRS domain, allowing to establish the governing design hazard depending on the intensity levels and adopted return periods. Based on these developments, a true multi-hazard approach is proposed for the preliminary design phase of a building subjected to wind and earthquake loading.

Extension of the Hybrid Force/displacement (HFD) Seismic Design Method to 3D Steel Moment-Resisting Frame Buildings

Performance-Based Seismic Design and Evaluation of Fused Steel Diagrid Frame

Pseudo-dynamic testing of hybrid frame with steel beams bolted to CFT columns

Seismic Behaviors of High-Strength Bolted End-Plate Connected Composite Steel Beam and Square Concrete Filled Steel Tube Column Frames

Hybrid moment resisting frame structure with bolted endplate steel beam and reinforced concrete column connections

Seismic response of non-structural components in multi-storey steel frames

Optimization & Design of High Rise Building with Different Structural Framing Systems Subjected To Seismic Loads

Seismic Performance Evaluation on Composite Frame Structures with T-shaped Multi-Cellular CFST Columns

Displacement Control of Existing Steel Moment-Resisting Frame Structures Using Buckling-Restrained Braces

Nonlinear seismic analysis of unsymmetric-plan structures retrofitted by hysteretic damped braces

Research on the Seismic Performance of High Strength Steel Frames

Study of Displacement-Based Seismic Design for RC Frame Structures

Hybrid Coupled Walls with Replaceable Shear Links: Technical Solution and Seismic Performance of a 3D Multi‐Story Building

Seismic design, modelling and assessment of self-centering steel frames using post-tensioned connections with web hourglass shape pins

Seismic analysis of high-rise mega-braced frame-core buildings

Hybrid-self-centring steel frames: Insights and probabilistic seismic assessment

Seismic Retrofit of Reinforced Concrete Frame Buildings with Hysteretic Bracing Systems: Design Procedure and Behaviour Factor

Enhancing Seismic Performance of Multi-story Steel Buildings Using Inner Mega Braced Frames

A Performance-Based Design Approach for Rectangular Concrete-Filled Steel Tube (RCFT) Frames under Seismic Loading

Multi-hazard design of low-damage high-rise steel–timber buildings subjected to wind and earthquake loading

Performance-based-plastic-design of damage-control steel MRFs equipped with self-centring energy dissipation bays