Abstract:Wearable electronics are becoming more and more popular, and in order to ensure the safety and accuracy of wearable electronics, the requirements for the refinement and stability of flexible electrodes are getting higher and higher. The reduction of the amount of ink jet and the reduction of surface charge density and electrostatic stress near the nozzle hole can significantly improve the jetting state of the ink. And nozzle voltage is a key factor that affects them. The spreading of ink droplets on the substrate and the formation of a specific pattern is a dynamic process, which is closely related to the properties of the substrate and the state of the ink droplets. In this paper, PEN is used as the substrate to print silver electrode, with its good thermal stability and good mechanical properties. In order to solve these problems and improve the accuracy of the electrode pattern on PEN substrate, a joint control method of ink drop spacing and nozzle voltage is proposed. It is found that the accuracy of the pattern increases with the increase of the drop spacing. At 45 μm, 90.91 % of the pattern accuracy with the ideal pattern can be achieved. As the nozzle voltage decreases, so does the satellite spot. And at 25 V, it can achieve satellite-free spot printing. Because this method avoids the adjustment of ink properties and the regulation of voltage waveform, this advancement provides a simpler solution for patterned high-precision printed silver electrodes based on flexible substrates. In addition, a silver electrode with a resistivity of 3.43 μΩ·cm was obtained at an annealing temperature of 160 °C. The resistivity change of the electrode only 7.58 % under 5000 times of bending. This is very rare in flexible electrodes.The silver film on the PEN substrate exhibited excellent adhesion under the tape test. XPS depth profiling was used to characterize the elemental states of the films at different depths. The results indicated that the coordination bond between the PEN substrate and the Ag film resulted in good bending resistance, which gives a persuasive explanation for the first time. This result is also due to the precise handling of the film, which also results in a homogeneous distribution of the film. It solves the problem of poor adhesion of silver electrodes based on other substrates or other preparation methods. Therefore, silver electrodes based on PEN substrates have a broad application prospect in the field of flexible wearable electronics.

Fabrication of Copper Electrode on Flexible Substrate Through Ag+-Based Inkjet Printing and Rapid Electroless Metallization

Fabrication of Conductive Copper Patterns Using Reactive Inkjet Printing Followed by Two-Step Electroless Plating

A Facile Process Combined with Inkjet Printing, Surface Modification and Electroless Deposition to Fabricate Adhesion-Enhanced Copper Patterns on Flexible Polymer Substrates for Functional Flexible Electronics

Fabrication of flexible copper patterns by electroless plating with copper nanoparticles as seeds

Fabrication of copper patterns on flexible substrate by patterning-adsorption-plating process.

Compatible Ag+ Complex-Assisted Ultrafine Copper Pattern Deposition on Poly(ethylene Terephtalate) Film with Micro Inkjet Printing

Epoxy Resin-Assisted Cu Catalytic Printing for Flexible Cu Conductors on Smooth and Rough Substrates

Directly Electroplated Metallization on Flexible Substrates Based on Silver Nanowire Conductive Composite for Wearable Electronics

Printable and Flexible Copper-Silver Alloy Electrodes with High Conductivity and Ultrahigh Oxidation Resistance

Custom Writing Catalytic Tracks for Selective Pattern Metallization on Flexible Substrate

Inkjet‐Printed Xerogel Scaffolds Enabled Room‐Temperature Fabrication of High‐Quality Metal Electrodes for Flexible Electronics

Inkjet Direct Printing Approach for Flexible Electronic

High-precision silver electrode based on PEN substrate with robust mechanical performance

Inkjet printing high performance flexible electrodes via a graphene decorated Ag ink

Paper-Based Inkjet-Printed Flexible Electronic Circuits.

Facile Preparation of Monodisperse Cu@Ag Core–Shell Nanoparticles for Conductive Ink in Printing Electronics

Electroless Plating Cycle Process for High-Conductivity Flexible Printed Circuits

Fabrication of User-Defined Copper Conductive Patterns Onto Paper Substrate for Flexible Electronics by Combining Wax Patterning with Electroless Plating

Electrohydrodynamic Printing of Ultrafine and Highly Conductive Ag Electrodes for Various Flexible Electronics

Direct Writing Highly Conductive Silver Pattern on Flexible Substrate Based on Particle-Free and Ionic Liquid-Assisted Ink

Polydimethylsiloxane-Assisted Catalytic Printing for Highly Conductive, Adhesive, and Precise Metal Patterns Enabled on Paper and Textiles.