Abstract:UNLABELLED The initial emittable concentration of volatile organic compounds (VOC) is a key parameter not only in evaluating the 'green' degree of building materials but also in modeling their emission characteristics. Although the impact of temperature on initial emittable concentration is important, it has not been reported in the literature. Using the multi-emission/flush regression method we developed, the impact of temperature on the initial emittable concentration of formaldehyde in medium density board has been experimentally studied. It is observed that the initial emittable concentration increases significantly with increasing temperature. When the temperature rises by 25.4°C, it increases by about 507%. However, the initial emittable concentration at room temperature is far less than the value measured by the perforator method recommended by the Chinese National Standard GB/T 17657-1999, which measures the total concentration of formaldehyde in medium density board. This means most of formaldehyde in the building material cannot emit out at room temperature. The results will be very helpful in estimating the emission characteristics of building materials at different temperatures as well as for developing green building materials. PRACTICAL IMPLICATIONS Knowledge of initial emittable concentration is important for VOC emission prediction. According to our experimental study, the initial emittable concentration is heavily dependent on temperature, and this factor should be considered in dealing with heating or cooling process of building materials. The significant difference between the initial emittable concentration and total concentration suggests that the total concentration seems not appropriate for judging the pollution level of building materials.

The Combined Effects of Temperature and Electric Fields on Formaldehyde Emission from Building Materials: Experiment and Molecular Dynamics Simulation

Effect of High-Voltage Electric Field on Formaldehyde Diffusion Within Building Materials

Formaldehyde Diffusion Within Crystalline and Amorphous Cellulose at Different Temperatures and Electric Fields: A Molecular Dynamics Study

Experimental Study of Formaldehyde Diffusion with in Building Materials in Different High-Voltage Electric Field

Influence of temperature on formaldehyde emission parameters of dry building materials

Experimental study and processing method of formaldehyde diffusion within building materials

Impact of Temperature on the Ratio of Initial Emittable Concentration to Total Concentration for Formaldehyde in Building Materials: Theoretical Correlation and Validation.

Effect of Electric Field on Adsorption of Formaldehyde by Β-Cellobiose in Micro-Scale

Study on Formaldehyde Emissions from Porous Building Material under Non-Isothermal Conditions

Impact of Temperature on the Initial Emittable Concentration of Formaldehyde in Building Materials: Experimental Observation.

Impact Of Temperature On The Initial Emittable Concentration Of Voc In Building Materials: Experiment And Model Development

The effect of humidity on formaldehyde emission parameters of a medium-density fiberboard: Experimental observations and correlations

The Combined Effects of Temperature and Humidity on Initial Emittable Formaldehyde Concentration of a Medium-Density Fiberboard

Influencing factors analysis of formaldehyde emission from GluBam sheet by climate chamber test

Effect of Temperature on Formaldehyde Diffusion in Cellulose Amorphous Region: A Simulation Study

Development of a Physics-Based Model for Analyzing Formaldehyde Emissions from Building Material under Coupling Effects of Temperature and Humidity

A New Method for Determining the Initial Mobile Formaldehyde Concentrations, Partition Coefficients, and Diffusion Coefficients of Dry Building Materials

IMPACT OF TEMPERATURE ON THE EMITTABLE CONTENT OF FORMALDEHYDE IN BUILDING MATERIAL

The Effect of Heat Treatment and Acetylation on Formaldehyde Emission in Cellulose: A Molecular Dynamics Simulation Study

Influence of humidity on the initial emittable concentration of formaldehyde and hexaldehyde in building materials: experimental observation and correlation