Abstract:The partition and effective diffusion coefficients of formaldehyde were measured for three materials (conventional gypsum wallboard, "green" gypsum wallboard, and "green" carpet) under three relative humidity (RH) conditions (20%, 50%, and 70% RH). The "green" materials contained recycled materials and were friendly to environment. A dynamic dual-chamber test method was used. Results showed that a higher relative humidity led to a larger effective diffusion coefficient for two kinds of wallboards and carpet. The carpet was also found to be very permeable resulting in an effective diffusion coefficient at the same order of magnitude with the formaldehyde diffusion coefficient in air. The partition coefficient (K-ma) of formaldehyde in conventional wallboard was 1.52 times larger at 50% RH than at 20% RH, whereas it decreased slightly from 50% to 70% RH, presumably due to the combined effects of water solubility of formaldehyde and micro-pore blocking by condensed moisture at the high RH level. The partition coefficient of formaldehyde increased slightly with the increase of relative humidity in "green" wallboard and "green" carpet. At the same relative humidity level, the "green" wallboard had larger partition coefficient and effective diffusion coefficient than the conventional wallboard, presumably due to the micro-pore structure differences between the two materials. The data generated could be used to assess the sorption effects of formaldehyde on building materials and to evaluate its impact on the formaldehyde concentration in buildings.Implications: Based on the results of this study, the sink effects of these commonly used materials (conventional and "green" gypsum wallboards, "green" carpet) on indoor formaldehyde concentration could be estimated. The effects of relative humidity on the diffusion and partition coefficients of formaldehyde were found to differ for materials and for different humidity levels, indicating the need for further investigation of the mechanisms through which humidity effects take place.

Effect of High-Voltage Electric Field on Formaldehyde Diffusion Within Building Materials

Experimental Study of Formaldehyde Diffusion with in Building Materials in Different High-Voltage Electric Field

The Combined Effects of Temperature and Electric Fields on Formaldehyde Emission from Building Materials: Experiment and Molecular Dynamics Simulation

Effect of Electric Field on Adsorption of Formaldehyde by Β-Cellobiose in Micro-Scale

Influence of high-voltage electrostatic field on formaldehyde diffusion within cellulose Iβ

Formaldehyde Diffusion Within Crystalline and Amorphous Cellulose at Different Temperatures and Electric Fields: A Molecular Dynamics Study

Experimental study and processing method of formaldehyde diffusion within building materials

A Study on the Formaldehyde Emission Parameters of Porous Building Materials Based on Adsorption Potential Theory

Influence of temperature on formaldehyde emission parameters of dry building materials

Determination of Partition and Diffusion Coefficients of Formaldehyde in Selected Building Materials and Impact of Relative Humidity

A New Method for Determining the Initial Mobile Formaldehyde Concentrations, Partition Coefficients, and Diffusion Coefficients of Dry Building Materials

Comprehensive Influence of Environmental Factors on the Emission Rate of Formaldehyde and VOCs in Building Materials: Correlation Development and Exposure Assessment

The effect of humidity on formaldehyde emission parameters of a medium-density fiberboard: Experimental observations and correlations

Determination of concentrations of mobile volatile organic compounds, the partition coefficient and the diffusion coefficient in dry building materials

Influence of humidity on the initial emittable concentration of formaldehyde and hexaldehyde in building materials: experimental observation and correlation

Effect of Temperature on Formaldehyde Diffusion in Cellulose Amorphous Region: A Simulation Study

Study on Formaldehyde Emissions from Porous Building Material under Non-Isothermal Conditions

Inhibitory Effect of Mould Growth on Formaldehyde Emissions from Medium-Density Fibreboards: Evidence from Field Observations in Three Experimental Houses

Impact of Temperature on the Ratio of Initial Emittable Concentration to Total Concentration for Formaldehyde in Building Materials: Theoretical Correlation and Validation.

A Rapid and Accurate Method, Ventilated Chamber C-history Method, of Measuring the Emission Characteristic Parameters of Formaldehyde/vocs in Building Materials