Abstract:UNLABELLED The initial emittable concentration of volatile organic compounds (VOC) is a key parameter not only in evaluating the 'green' degree of building materials but also in modeling their emission characteristics. Although the impact of temperature on initial emittable concentration is important, it has not been reported in the literature. Using the multi-emission/flush regression method we developed, the impact of temperature on the initial emittable concentration of formaldehyde in medium density board has been experimentally studied. It is observed that the initial emittable concentration increases significantly with increasing temperature. When the temperature rises by 25.4°C, it increases by about 507%. However, the initial emittable concentration at room temperature is far less than the value measured by the perforator method recommended by the Chinese National Standard GB/T 17657-1999, which measures the total concentration of formaldehyde in medium density board. This means most of formaldehyde in the building material cannot emit out at room temperature. The results will be very helpful in estimating the emission characteristics of building materials at different temperatures as well as for developing green building materials. PRACTICAL IMPLICATIONS Knowledge of initial emittable concentration is important for VOC emission prediction. According to our experimental study, the initial emittable concentration is heavily dependent on temperature, and this factor should be considered in dealing with heating or cooling process of building materials. The significant difference between the initial emittable concentration and total concentration suggests that the total concentration seems not appropriate for judging the pollution level of building materials.

Study on Formaldehyde Emissions from Porous Building Material under Non-Isothermal Conditions

Influencing factors analysis of formaldehyde emission from GluBam sheet by climate chamber test

Experimental Research on Formaldehyde Emission Characteristics from Glubam by Climate Chamber Test

The Combined Effects of Temperature and Electric Fields on Formaldehyde Emission from Building Materials: Experiment and Molecular Dynamics Simulation

Impact Of Temperature On The Initial Emittable Concentration Of Voc In Building Materials: Experiment And Model Development

Influence of temperature on formaldehyde emission parameters of dry building materials

Development of a Physics-Based Model for Analyzing Formaldehyde Emissions from Building Material under Coupling Effects of Temperature and Humidity

Experimental study and processing method of formaldehyde diffusion within building materials

Influence factors analysis of formaldehyde emission from wood-based panel by environmental chamber test and mathematical modeling

A New Method for Determining the Initial Mobile Formaldehyde Concentrations, Partition Coefficients, and Diffusion Coefficients of Dry Building Materials

Impact of Temperature on the Initial Emittable Concentration of Formaldehyde in Building Materials: Experimental Observation.

The effect of humidity on formaldehyde emission parameters of a medium-density fiberboard: Experimental observations and correlations

Characterisation of VOC and Formaldehyde Emission from Building Materials in a Static Environmental Chamber: Model Development and Application

Impact of Temperature on the Ratio of Initial Emittable Concentration to Total Concentration for Formaldehyde in Building Materials: Theoretical Correlation and Validation.

Comprehensive Influence of Environmental Factors on the Emission Rate of Formaldehyde and VOCs in Building Materials: Correlation Development and Exposure Assessment

Early-Stage Emissions of Formaldehyde and Volatile Organic Compounds from Building Materials: Model Development, Evaluation, and Applications.

The Impact of Relative Humidity on the Emission Behaviour of Formaldehyde in Building Materials

The Combined Effects of Temperature and Humidity on Initial Emittable Formaldehyde Concentration of a Medium-Density Fiberboard

A general analytical model for formaldehyde and VOC emission/sorption in single-layer building materials and its application in determining the characteristic parameters

Comparison of multidimensional mass transfer models of formaldehyde emissions originating from different surfaces of wood-based panels