Abstract:The partition and effective diffusion coefficients of formaldehyde were measured for three materials (conventional gypsum wallboard, "green" gypsum wallboard, and "green" carpet) under three relative humidity (RH) conditions (20%, 50%, and 70% RH). The "green" materials contained recycled materials and were friendly to environment. A dynamic dual-chamber test method was used. Results showed that a higher relative humidity led to a larger effective diffusion coefficient for two kinds of wallboards and carpet. The carpet was also found to be very permeable resulting in an effective diffusion coefficient at the same order of magnitude with the formaldehyde diffusion coefficient in air. The partition coefficient (K-ma) of formaldehyde in conventional wallboard was 1.52 times larger at 50% RH than at 20% RH, whereas it decreased slightly from 50% to 70% RH, presumably due to the combined effects of water solubility of formaldehyde and micro-pore blocking by condensed moisture at the high RH level. The partition coefficient of formaldehyde increased slightly with the increase of relative humidity in "green" wallboard and "green" carpet. At the same relative humidity level, the "green" wallboard had larger partition coefficient and effective diffusion coefficient than the conventional wallboard, presumably due to the micro-pore structure differences between the two materials. The data generated could be used to assess the sorption effects of formaldehyde on building materials and to evaluate its impact on the formaldehyde concentration in buildings.Implications: Based on the results of this study, the sink effects of these commonly used materials (conventional and "green" gypsum wallboards, "green" carpet) on indoor formaldehyde concentration could be estimated. The effects of relative humidity on the diffusion and partition coefficients of formaldehyde were found to differ for materials and for different humidity levels, indicating the need for further investigation of the mechanisms through which humidity effects take place.

The Impact of Relative Humidity on the Emission Behaviour of Formaldehyde in Building Materials

Influence of humidity on the initial emittable concentration of formaldehyde and hexaldehyde in building materials: experimental observation and correlation

The effect of humidity on formaldehyde emission parameters of a medium-density fiberboard: Experimental observations and correlations

Impact of Temperature on the Ratio of Initial Emittable Concentration to Total Concentration for Formaldehyde in Building Materials: Theoretical Correlation and Validation.

The Combined Effects of Temperature and Humidity on Initial Emittable Formaldehyde Concentration of a Medium-Density Fiberboard

Comprehensive Influence of Environmental Factors on the Emission Rate of Formaldehyde and VOCs in Building Materials: Correlation Development and Exposure Assessment

Effect of relative humidity and temperature on formaldehyde emissions of plywood panels

Determination of Partition and Diffusion Coefficients of Formaldehyde in Selected Building Materials and Impact of Relative Humidity

A Literature Review Investigating the Impact of Temperature and Humidity on Volatile Organic Compound Emissions from Building Materials

Impact of Temperature on the Initial Emittable Concentration of Formaldehyde in Building Materials: Experimental Observation.

Influence of temperature on formaldehyde emission parameters of dry building materials

The Effects of Temperature and Humidity on the VOC Emission Rate from Dry Building Materials

Association Between the Emission Rate and Temperature for Chemical Pollutants in Building Materials: General Correlation and Understanding.

Impact Of Temperature On The Initial Emittable Concentration Of Voc In Building Materials: Experiment And Model Development

A Rapid and Accurate Method, Ventilated Chamber C-history Method, of Measuring the Emission Characteristic Parameters of Formaldehyde/vocs in Building Materials

Estimates of Parameters for Formaldehyde Emission Model from Plywood Panel under Various Temperature and Relative Humidity Conditions

Study on the Effect of Humidity on Formaldehyde Emission Parameters of Wood-Based Panels

Influence of Temperature on Formaldehyde Emission Parameters of Solvent-Based Coatings

Development of a Physics-Based Model for Analyzing Formaldehyde Emissions from Building Material under Coupling Effects of Temperature and Humidity

C-History Method: Rapid Measurement Of The Initial Emittable Concentration, Diffusion And Partition Coefficients For Formaldehyde And Vocs In Building Materials