Abstract:The initial mobile formaldehyde concentration, C-m,C-0; the partition coefficient, K; and the diffusion coefficient, D, of a dry building material are key parameters to characterize formaldehyde emissions from the building material. The solvent extraction method and direct thermal desorption method can overestimate C-m,C-0 because of high temperature. A new method has been developed to determine C-m,C-0 under similar conditions to common indoor environment, together with K and D. In the proposed method, the tested materials are placed in an airtight environmental chamber for which the temperature can be controlled by a water bath, then the materials undergo a multisorption/emission process and the instantaneous formaldehyde concentration in the chamber is recorded. The K and C-m,C-0 are determined from the equilibrium concentrations after every sorption by means of the linear least-square regression, and D is obtained by fitting the concentration at the emission stage into a mass-transfer-based model in the literature. Four kinds of wooden medium-density boards are tested. The C-m,C-0 measured using this method is the mobile formaldehyde concentration in the material, which differs significantly from the total formaldehyde concentration in the material measured by using the traditional method recommended by the Chinese standard (GB/T 176S7-1999) extraction method. This means that the mobile formaldehyde takes only a small portion of the total quantity in the tested material. The K, D, and C-m,C-0 values measured using this new method are used to predict formaldehyde concentrations for sorption processes. The results agree well with experimental data. In addition, some factors influencing the accuracy are analyzed.

C-History Method: Rapid Measurement Of The Initial Emittable Concentration, Diffusion And Partition Coefficients For Formaldehyde And Vocs In Building Materials

Improved C-history Method for Rapidly and Accurately Measuring the Characteristic Parameters of Formaldehyde/vocs Emitted from Building Materials

A Rapid and Accurate Method, Ventilated Chamber C-history Method, of Measuring the Emission Characteristic Parameters of Formaldehyde/vocs in Building Materials

Two-parameter C-history Method: A Fast and Accurate Method for Determining the Characteristic Parameters of Formaldehyde/voc Early-Stage Emissions from Building Materials

Applying C-history method to measure the VOC emission parameters of building material and furniture: Tests and validation

Early Stage C-history Method: Rapid and Accurate Determination of the Key SVOC Emission or Sorption Parameters of Indoor Materials

A new method, c-history based sink effect method, of determining key physical properties of VOC emission from dry building materials

New method for determining VOC emission parameters for dry building materials

Determination of the Equivalent Emission Parameters of Wood-Based Furniture by Applying C-history Method

A Novel Method for Measuring the Diffusion, Partition and Convective Mass Transfer Coefficients of Formaldehyde and VOC in Building Materials

A New Method for Determining the Initial Mobile Formaldehyde Concentrations, Partition Coefficients, and Diffusion Coefficients of Dry Building Materials

Variable volume loading method: a convenient and rapid method for measuring the initial emittable concentration and partition coefficient of formaldehyde and other aldehydes in building materials.

A New Method for Determining the Formaldehyde Emission Characteristic Parameters of Building Materials: Single Airtight Emission Method

Comparative research between closed chamber C-history method and other methods for measuring characteristic parameters of building materials

Alternately Airtight/ventilated Emission Method: A Universal Experimental Method for Determining the VOC Emission Characteristic Parameters of Building Materials

Determination of concentrations of mobile volatile organic compounds, the partition coefficient and the diffusion coefficient in dry building materials

A Fast and Accurate Airtight Chamber Method for Determining the Characteristic Parameters of VOC Emission from Building Materials

Measuring key emission parameters of VOC from materials based on concentration trajectory in ventilated chamber

Dynamic—static Chamber Method for Simultaneous Measurement of the Diffusion and Partition Coefficients of VOCs in Barrier Layers of Building Materials

A General Regression Method for Accurately Determining the Key Parameters of VOC Emissions from Building Materials/furniture in a Ventilated Chamber

Influence of temperature on formaldehyde emission parameters of dry building materials