Abstract:The partition and effective diffusion coefficients of formaldehyde were measured for three materials (conventional gypsum wallboard, "green" gypsum wallboard, and "green" carpet) under three relative humidity (RH) conditions (20%, 50%, and 70% RH). The "green" materials contained recycled materials and were friendly to environment. A dynamic dual-chamber test method was used. Results showed that a higher relative humidity led to a larger effective diffusion coefficient for two kinds of wallboards and carpet. The carpet was also found to be very permeable resulting in an effective diffusion coefficient at the same order of magnitude with the formaldehyde diffusion coefficient in air. The partition coefficient (K-ma) of formaldehyde in conventional wallboard was 1.52 times larger at 50% RH than at 20% RH, whereas it decreased slightly from 50% to 70% RH, presumably due to the combined effects of water solubility of formaldehyde and micro-pore blocking by condensed moisture at the high RH level. The partition coefficient of formaldehyde increased slightly with the increase of relative humidity in "green" wallboard and "green" carpet. At the same relative humidity level, the "green" wallboard had larger partition coefficient and effective diffusion coefficient than the conventional wallboard, presumably due to the micro-pore structure differences between the two materials. The data generated could be used to assess the sorption effects of formaldehyde on building materials and to evaluate its impact on the formaldehyde concentration in buildings.Implications: Based on the results of this study, the sink effects of these commonly used materials (conventional and "green" gypsum wallboards, "green" carpet) on indoor formaldehyde concentration could be estimated. The effects of relative humidity on the diffusion and partition coefficients of formaldehyde were found to differ for materials and for different humidity levels, indicating the need for further investigation of the mechanisms through which humidity effects take place.

A REGRESSION METHOD FOR MEASURING INITIAL MOBILE FORMALDEHYDE CONCENTRATION AND PARTITION COEFFICIENT OF DRY BUILDING MATERIALS

A New Method for Determining the Initial Mobile Formaldehyde Concentrations, Partition Coefficients, and Diffusion Coefficients of Dry Building Materials

Determination of concentrations of mobile volatile organic compounds, the partition coefficient and the diffusion coefficient in dry building materials

New method for determining VOC emission parameters for dry building materials

A Rapid and Accurate Method, Ventilated Chamber C-history Method, of Measuring the Emission Characteristic Parameters of Formaldehyde/vocs in Building Materials

An improved extraction method to determine the initial emittable concentration and the partition coefficient of VOCs in dry building materials☆

A Novel Method for Measuring the Diffusion, Partition and Convective Mass Transfer Coefficients of Formaldehyde and VOC in Building Materials

Correlation between the Desiccator Method and 1 m3 Climate Chamber Method for Measuring Formaldehyde Emissions from Veneered Particleboard

C-History Method: Rapid Measurement Of The Initial Emittable Concentration, Diffusion And Partition Coefficients For Formaldehyde And Vocs In Building Materials

USING AN AIRTIGHT CHAMBER TO MEASURE THE PARTITION COEFFICIENT OF FORMALDEHYDE ON TYPICAL ADSORBENTS

Variable volume loading method: a convenient and rapid method for measuring the initial emittable concentration and partition coefficient of formaldehyde and other aldehydes in building materials.

Applying C-history method to measure the VOC emission parameters of building material and furniture: Tests and validation

Determination of Partition and Diffusion Coefficients of Formaldehyde in Selected Building Materials and Impact of Relative Humidity

IMPACT OF TEMPERATURE ON THE EMITTABLE CONTENT OF FORMALDEHYDE IN BUILDING MATERIAL

A variable volume loading method to determine the initial emittable concentration of VOC and formaldehyde in building materials

A new method of measuring VOC emission characteristics of dry building materials

Improved C-history Method for Rapidly and Accurately Measuring the Characteristic Parameters of Formaldehyde/vocs Emitted from Building Materials

Characterisation of VOC and Formaldehyde Emission from Building Materials in a Static Environmental Chamber: Model Development and Application

A general analytical model for formaldehyde and VOC emission/sorption in single-layer building materials and its application in determining the characteristic parameters

A new method, c-history based sink effect method, of determining key physical properties of VOC emission from dry building materials

Comparative research between closed chamber C-history method and other methods for measuring characteristic parameters of building materials