Abstract:UNLABELLED The initial emittable concentration of volatile organic compounds (VOC) is a key parameter not only in evaluating the 'green' degree of building materials but also in modeling their emission characteristics. Although the impact of temperature on initial emittable concentration is important, it has not been reported in the literature. Using the multi-emission/flush regression method we developed, the impact of temperature on the initial emittable concentration of formaldehyde in medium density board has been experimentally studied. It is observed that the initial emittable concentration increases significantly with increasing temperature. When the temperature rises by 25.4°C, it increases by about 507%. However, the initial emittable concentration at room temperature is far less than the value measured by the perforator method recommended by the Chinese National Standard GB/T 17657-1999, which measures the total concentration of formaldehyde in medium density board. This means most of formaldehyde in the building material cannot emit out at room temperature. The results will be very helpful in estimating the emission characteristics of building materials at different temperatures as well as for developing green building materials. PRACTICAL IMPLICATIONS Knowledge of initial emittable concentration is important for VOC emission prediction. According to our experimental study, the initial emittable concentration is heavily dependent on temperature, and this factor should be considered in dealing with heating or cooling process of building materials. The significant difference between the initial emittable concentration and total concentration suggests that the total concentration seems not appropriate for judging the pollution level of building materials.

Influencing factors analysis of formaldehyde emission from GluBam sheet by climate chamber test

Experimental Research on Formaldehyde Emission Characteristics from Glubam by Climate Chamber Test

EXPERIMENTAL RESEARCH ON FIRE-RESISTANT PERFORMANCE OF GLUBAM STRUCTURAL WALL

Fire Simulation Test and Analysis of Laminated Bamboo Frame Building

Flammability Assessment Of Glubam With Cone-Calorimeter Tests

Experimental research on fire safety of lightweight bamboo frame buildings

Mechanical Properties of Aged Glue Laminated Bamboo for Structural Members

Acoustic Properties of Glued Laminated Bamboo and Spruce-Pine-fir

Influence factors analysis of formaldehyde emission from wood-based panel by environmental chamber test and mathematical modeling

Mechanical Behavior of Glubam Engineered Bamboo at Low Temperature

Production, Environmental Impact and Mechanical Properties of Glubam

Risk Assessment of Mold Growth on Engineered Bamboo and Its Application

Bending Performance of Glubam Beams Made with Different Processes

Correlation between the Desiccator Method and 1 m3 Climate Chamber Method for Measuring Formaldehyde Emissions from Veneered Particleboard

Performance Analysis of Indoor Smart Environmental Control Factors: Using Temperature to Control the Rate of Formaldehyde Emission

Study on Formaldehyde Emissions from Porous Building Material under Non-Isothermal Conditions

The Combined Effects of Temperature and Humidity on Initial Emittable Formaldehyde Concentration of a Medium-Density Fiberboard

The effect of humidity on formaldehyde emission parameters of a medium-density fiberboard: Experimental observations and correlations

Research Progress on Formaldehyde Emission of Wood-Based Panel

Development of a Physics-Based Model for Analyzing Formaldehyde Emissions from Building Material under Coupling Effects of Temperature and Humidity

Impact of Temperature on the Initial Emittable Concentration of Formaldehyde in Building Materials: Experimental Observation.