Abstract:USP <1207.1> Section 3.5 states that "A deterministic leak test method having the ability to detect leaks at the product's maximum allowable leakage limit is preferred when establishing the inherent integrity of a container-closure system." Ideally, container closure integrity of parenteral packaging would be evaluated by measuring a physical property that is sensitive to the presence of any package defect that breaches package integrity by increasing its leakage above its maximum allowable leakage limit. The primary goals of the work presented herein were to demonstrate the viability of the nondestructive, deterministic method known as laser-based gas headspace analysis for evaluating container closure integrity and to provide a physical model for predicting leak rates for a variety of container volumes, headspace conditions, and defect sizes. The results demonstrate that laser-based headspace analysis provides sensitive, accurate, and reproducible measurements of the gas ingress into glass vial-stopper package assemblies that are under either diffusive or effusive leak conditions. Two different types of positive controls were examined. First, laser-drilled micro-holes in thin metal disks that were crimped on top of 15R glass vials served as positive controls with a well-characterized defect geometry. For these, a strong correlation was observed between the measured ingress parameter and the size of the defect for both diffusive and effusive conditions. Second, laser-drilled holes in the wall of glass vials served as controls that more closely simulate real-world defects. Due to their complex defect geometries, their diffusive and effusive ingress parameters did not necessarily correlate; this is an important observation that has significant implications for standardizing the characterization of container defects. Regardless, laser-based headspace analysis could readily differentiate positive and negative controls for all leak conditions, and the results provide a guide for method development of container closure integrity tests.LAY ABSTRACT: The new USP 39 <1207>, "Package Integrity Evaluation-Sterile Products", states in section 3.4.1: "tracer gas tests performed using … laser-based gas headspace analysis [have] been shown to be sensitive enough to quantitatively analyze leakage through the smallest leak paths found to pose the smallest chance of liquid leakage or microbial ingress in rigid packaging." In addition, USP <1207> also states that "for such methods, the limit of detection can be mathematically predicted on the basis of gas flow kinetics." Using the above statements as a foundation, this paper presents a theoretical basis for predicting the gas ingress through well-defined defects in product vials sealed under a variety of headspace conditions. These calculated predictions were experimentally validated by comparing them to measurements of changes in the headspace oxygen content or total pressure for several different positive controls using laser-based headspace analysis. The results demonstrated that laser-based headspace analysis can, by readily differentiating between negative controls and positive controls with a range of defect sizes on the micron scale, be used to assess container closure integrity. The work also demontrated that caution must be used when attempting to correlate a leak rate to an idealized defect-size parameter.

Leakage Detection of Vial Based on Tunable Diode Laser Absorption Spectroscopy

Dynamics of the Fas-and stress-induced apoptosis of human neutrophils under the action of endotoxins

The Development of a Novel Headspace O2 Concentration Measurement Sensor for Vials

Bubble Counter Based on Photoelectric Technique for Leakage Detection of Cryogenic Valves

VAPOR PRESSURE MEASUREMNET OF LIQUID DESSICANTS AT LOW TEMPERATURES BY A NOVEL TECHNIQUE

Die elektrokardiographische Überwiegenskurve und ihre Bedeutung für die Frage der Hypertrophie und der Myokardschädigung

Multiple Gas Detection Using V-cavity Coupled Diode Laser

Artificial Absorption Creation for More Accurate Tunable Diode Laser Absorption Spectroscopy Measurement

Development of a Single Vial Mass Flow Rate Monitor to Assess Pharmaceutical Freeze Drying Heterogeneity

Method Development for Container Closure Integrity Evaluation via Headspace Gas Ingress by Using Frequency Modulation Spectroscopy

An accurate detection of micro-collapse during the lyophilisation of a 5% w/v lactose solution using a combination of novel techniques: intelligent laser speckle imaging (ILSI) and through-vial impedance spectroscopy (TVIS)

High-temperature Determination of Ammonia by Tunable Diode Laser Absorption Spectroscopy (TDLAS)

Study on rapid detection of food deterioration based on laser absorption spectroscopy

A Feasibility Study on the Non-Invasive Analysis of Bottled Compound E Jiao Oral Liquid Using Near Infrared Spectroscopy

Application of Tunable Diode Laser Spectroscopy for the Assessment of Food Quality

Real‐time Droplet Size Analysis Using Laser Micrometer As a Process Analytical Technology Tool for Continuous Dripping Process

Container Closure Integrity Test Using Frequency Modulation Spectroscopy Headspace Analysis with Carbon Dioxide as a Tracer Gas

A Measurement System for the Tightness of Sealed Vessels Based on Machine Vision Using Deep Learning Algorithm

Droplet-Type Optical Fiber Volatile Organic Compound Sensor Based on PDMS

Research on Water Vapor Release and Adsorption Mechanism to Improve the Measurement of Dew Point Humidity Sensor

Preliminary research on measurement system for micro liquid volume