Abstract:Single-walled carbon nanohorns (SWCNHs) was utilized as an ion-to-electron transducer to fabricate all-solid-state ion-selective electrodes (ISE) for the first time. To evaluate the performance of developed SWCNHs-based calcium ISE, various electrochemical experiments were carried out. A Nernstian response (29.69 +/- 0.24 mV/decade, R-2 = 0.9996) was acquired across a broad linear range between 10(-6) and 10(-2) M, and the detection limit of 10(-6.1) M was achieved in the meantime. Additionally, water layer test and reversed chronopotentiometry were used to estimate the long-term and short-term stability of SWCNHs-based ISE, respectively, indicating SWCNHs is capable of enhancing potential stability on account of its hydrophobicity. Furthermore, a SWCNHs-based reference electrode (RE) was fabricated by directly coating a photo-polymerised reference membrane (RM) onto a SWCNHs modified electrode. Results demonstrated that the SWCNHs-based RE exhibited slight potential fluctuation for common ions with different charges over a wide concentration range of calibration. Based on these superior results, an integrated all-solid-state SWCNHs-based potentiometric sensing device combined SWCNHs-based ISE and SWCNHs-based RE was constructed for detecting calcium, which shows a Nernstian response with a slope of 27.14 mV/decade. This developed electrode in the aid of SWCNHs exhibits fast response as well as outstanding potential stability, making it extreme promising for routine sensing application.

Stable Thin-Film Reference Electrode on Plastic Substrate for All-Solid-State Ion-Sensitive Field-Effect Transistor Sensing System

A Platinum Reference Electrode for Ion-Sensitive Field-Effect Transistor

All-Additive Solution Processed Silver/Silver Chloride Reference Electrode for Handheld Ion-Sensitive Field-Effect Transistor Sensing System

All-Solid-State Carbonate-Selective Electrode Based on Screen-Printed Carbon Paste Electrode

All-solid-state blood calcium sensors based on screen-printed poly(3,4-ethylenedioxythiophene) as the solid contact

Integrated Low Voltage Ion Sensing Organic Field Effect Transistor System on Plastic

Fabrication and characterization of planar reference electrode for on-chip electroanalysis

Highly Stable Fibrous Solid-State Ag/AgCl Reference Electrode

A Reference-Less Semiconductor Ion Sensor

Ion sensors based on organic semiconductors acting as quasi-reference electrodes

Carbon Ion Implantation-modified Hafnium Oxide to Construct a RELESIS for Ph Sensing

Fabrication of integrated all-solid titanium dioxide and silver/silver chloride electrodes for facile pH electrochemical detection via extended-gate field effect transistor transducing method

All-solid-state Potentiometric Sensor Using Single-Walled Carbon Nanohorns As Transducer

Reliable unencapsulated Ag/Ag 2 S micro-reference electrodes for battery research and other applications in organic media

An all-solid-state screen-printed carbon paste reference electrode based on poly(3,4-ethylenedioxythiophene) as solid contact transducer

Influence of an Integrated Quasi-Reference Electrode on the Stability of All -Solid-state AlGaN/GaN Based Ph Sensors

An All-Solid-State Silicate Ion-Selective Electrode Using PbSiO3 As a Sensitive Membrane

Synthesis, Properties, and Applications of All-Solid-state Reference Electrode Based on AgTi2(PO4)3

Batch Fabrication of Miniaturized Ag/AgCl Reference Electrode with Ion Exchanging Micro-Nano-Pores by Silicon-Base Double-Side Anisotropic Etching Process

All-solid-state Reference Electrode Based on a Solid-State Electrolyte of High Densified Lithium Lanthanum Titanium Oxide (LLTO)

Development of an Ion Sensitive Field Effect Transistor Based Urea Biosensor with Solid State Reference Systems