Abstract:Reference electrodes which demonstrate long-term potential stability are essential for many continuous monitoring applications and are commonly based on Ag|AgCl electrodes; however, these electrodes are susceptible to poisoning from aqueous sulphide species which are commonly present in wastewater and natural groundwater. This work presents a sulphide resistant solid-state reference electrode (SSRE) based on a composite material using suspended KCl electrolyte and sacrificial AgCl in a cross-linked polyvinyl acetate polymer matrix. Sulphidation of the sacrificial AgCl produces a stable Ag 2 S precipitate and prevents further ingress of the poisoning sulphide species through the composite material. A novel SSRE using this material is compared to a control SSRE without suspended AgCl and a typical liquid filled reference electrode. These three reference electrodes are studied using electrochemical impedance spectroscopy (EIS), and their application is also studied in potentiometric pH sensing and cyclic voltammetry (CV). The long-term sulphide resistance of the two SSREs is also studied with potentiometry, and cross-sections of these electrodes were examined using micro X-ray fluorescence (μXRF). Both SSREs demonstrated higher impedance than the liquid reference electrode but were similar to other SSREs reported in the literature. This impedance did not result a meaningful difference in potentiometric pH sensing or CV experiments done using typical scan rates. The KCl/AgCl SSRE exhibited remarkable sulphide resistance, with all samples demonstrating a stable potential without maintenance after ca . 120 days of continuous immersion in 1 g L −1 Na 2 S solution, whereas KCl SSRE samples all demonstrated significant drift before this time. μXRF sulphur maps revealed that suspended AgCl prevented sulphide ingress, thus protecting the embedded Ag|AgCl electrode. This work presents a reference electrode that could enable long-term monitoring in challenging sulphide solutions, and also highlights a novel approach for preventing reference electrode poisoning which could be more widely explored.

A Platinum Reference Electrode for Ion-Sensitive Field-Effect Transistor

A Reference-Less Semiconductor Ion Sensor

Fabrication and characterization of planar reference electrode for on-chip electroanalysis

Micro Reference Electrode with an Ultrathin Ionic Path

Reliable unencapsulated Ag/Ag 2 S micro-reference electrodes for battery research and other applications in organic media

Integration of Ultra-Low Volume Pneumatic Microfluidics with a Three-Dimensional Electrode Network for On-Chip Biochemical Sensing

Construction and Evaluation of Cheap and Robust Miniature Ag/AgCl Reference Electrodes for Aqueous and Organic Electrolytes

Fibrous Ag/AgCl reference electrode guided by failure analysis for real-time wearable sweat analysis

An electroplated Ag/AgCl quasi-reference electrode based on CMOS top-metal for electrochemical sensing

Carbon Ion Implantation-modified Hafnium Oxide to Construct a RELESIS for Ph Sensing

Ion sensors based on organic semiconductors acting as quasi-reference electrodes

All-solid-state Potentiometric Sensor Using Single-Walled Carbon Nanohorns As Transducer

A sulphide resistant Ag|AgCl reference electrode for long-term monitoring

A Micro-Reference Electrode for Electrode-Resolved Impedance and Potential Measurements in All-Solid-State Battery Pouch Cells and Its Application to the Study of Indium-Lithium Anodes

In situ self-referenced intracellular two-electrode system for enhanced accuracy in single-cell analysis

Lead ions detection using CVD-grown ReS 2 -FET with the facilitation of a passivation layer

Modelling and Characterization of Novel Reference-Less Semiconductor Ion Sensor for Ph Sensing

An All-Solid-State Silicate Ion-Selective Electrode Using PbSiO3 As a Sensitive Membrane

A Toolbox of Reference Electrodes for Lithium Batteries

Steady-State and Transient Performance of Ion-Sensitive Electrodes Suitable for Wearable and Implantable Electro-Chemical Sensing

Amperometric Response of Solid-Contact Ion-Selective Electrodes Utilizing a Two-Compartment Cell and a Redox Couple in Solution